Skip to main content

Person

Todd S Miller

thumbnail
Problem The Village of Dryden, rural homeowners, farms, and businesses in the Virgil Creek Valley tap several confined sand and gravel aquifers in the Virgil Creek valley in the town of Dryden . The valley contains a large moraine with complex stratigraphy consisting of continuous and discontinuous layers of till, lake deposits, and glaciofluvial sand and gravel. Sand and gravel units form the aquifers in the valley-fill deposits. There are at least three extensive confined aquifer units at various depths. However, little is known about (1) the location of recharge and discharge areas, (2) direction of groundwater flow, (3) extent of hydraulic connection between aquifer units, and (4) extent of surface- and ground-water...
thumbnail
Problem - The valley-fill deposits in Upper Buttermilk Creek/Danby Creek valleys are sources of water for many homeowners, farms, and small businesses that are in this valley. The aquifer was mapped by Miller (2000) and identified as one of the 17 aquifers in Tompkins County that needs to be studied in more detail. However, there is little geohydrologic data in the valley. A cluster of wells in Upper Buttermilk valley are finished in sand and gravel, indicating that there is a sand and gravel aquifer in, at least, part of the valley. The Upper Buttermilk Creek/Danby Creek valleys are "through valleys"-- a part of a valley where the bedrock floor rose to land surface and formed a preglacial surface-water divide....
thumbnail
Problem - The entire Tug Hill glacial aquifer is a 47-mile-long, crescent-shaped mixture of glacial deposits of predominantly sand and gravel on the western side of the Tug Hill Plateau in Jefferson, Oswego, and Oneida Counties in north central New York. The Tug Hill aquifer can be divided into three parts (northern, central, and southern) based on geohydrological setting, depositional history, and type of glacial deposits (fig. 1). In this study, the name “Tug Hill glacial aquifer” refers only to the 29-mi-long northern and central parts of the Tug Hill aquifer. (The southern part was not included in this investigation.) For this study, the division between the northern and central parts of the aquifer was placed...
thumbnail
Background Since 1980 the U.S. Geological Survey has conducted a Detailed Aquifer Mapping Program in upstate New York, first in cooperation with the New York State Department of Health (NYSDOH), and later in cooperation with the New York State Department of Environmental Conservation (NYSDEC), Division of Water. The objective of this program is to define the hydrogeology of important stratified-drift aquifers in upstate New York, and to present the information as individual sets of maps at a 1:24,000 scale. Each published report from this program describes the hydrogeology of a specific aquifer or section of aquifer, and depicts selected hydrogeologic characteristics. These reports form the foundation of NYSDEC's...
thumbnail
Problem - Several supply wells in Oswego County were evaluated by the USGS in 1999 by using stable oxygen and hydrogen isotopes and chlorofluorocarbon (CFC) age dating techniques. For two municipal well sites (the Villages of Sandy Creek and Lacona, and the Village of Pulaski) that tap a shallow, unconfined aquifer (typically 20-50 ft thick) there were significant discrepancies between ground-water recharge ages determined by chemical data and those determined by ground-water-flow models developed by independent studies. The significant discrepancies between the times of travel of ground water as determined by numerical ground-water-flow modeling and geochemical dating techniques in Oswego County need to be understood...
View more...
ScienceBase brings together the best information it can find about USGS researchers and offices to show connections to publications, projects, and data. We are still working to improve this process and information is by no means complete. If you don't see everything you know is associated with you, a colleague, or your office, please be patient while we work to connect the dots. Feel free to contact sciencebase@usgs.gov.