Skip to main content

Person

Nicole C Fenton

thumbnail
Electrical resistivity tomography (ERT) surveys were done northwest of the Air Force Research Laboratory (AFRL) at Edwards Air Force Base. ERT surveys were done at four locations in May through June of 2018 to refine the understanding of the bedrock-alluvial aquifer transition zone downgradient from the AFRL. The ERT technique injects direct-current electricity with known voltage and current into the earth using a series of electrodes and measures the resulting resistivity. This technique is generally limited to investigations of aquifer properties less than 100 meters below land surface. Data from other geophysical techniques co-located with the ERT data, including time-domain electromagnetics and horizontal-to-vertical...
thumbnail
The Air Force Research Laboratory (AFRL) is about 7 kilometers southwest of Boron, California, and covers 320 square kilometers of Edwards Air Force Base. The AFRL consists of 12 facilities for testing full-size rocket engines, engine components, and liquid and solid propellants. The historical release of contaminants from rocket test stands, evaporation ponds, burn pits, catch basins, and leaking waste-collection tanks has contaminated groundwater in the AFRL. Groundwater aquifers near the AFRL are mostly restricted to fractured granitic bedrock, but previous studies indicate that groundwater and associated contaminants have moved into alluvium to the north and northwest. The U.S. Geological Survey (USGS) and the...
thumbnail
Edwards Air Force Base (EAFB) is located in Kern County, CA, approximately 35 kilometers (km) northeast of Lancaster and 9 km south of California City. The Air Force Research Laboratory (AFRL) is situated on EAFB, approximately 7 km southwest of Boron, CA. Release of contaminants from the AFRL facilities have contaminated local groundwater, which is mostly restricted to fractured granitic bedrock, but studies indicate that the groundwater and contaminant plumes have moved into alluvial deposits to the north and northwest (AECOM, 2014). The U.S. Geological Survey (USGS) and the Air Force Civil Engineer Center (AFCEC) entered into a cooperative agreement in 2017 to develop a hydrogeologic framework model to help determine...
thumbnail
The U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board and Bureau of Land Management compiled and analyzed data for mapping groundwater salinity in selected oil and gas fields in California. The data for the South Cuyama oil field includes well construction data, digitized borehole geophysical data, geochemical analyses of water samples from oil and gas wells and groundwater wells, geological formation depths, and the groundwater total dissolved solids (TDS) calculations. These data have been compiled from many sources and span several decades. The well construction data includes attributes such as the date drilling began (spud date), borehole orientation, well depth...
thumbnail
The U.S. Geological Survey (USGS) and Air Force Civil Engineering Center (AFCEC) have entered into a cooperative agreement to refine the hydrogeology in the Northeast AFRL and Arroyos groundwater areas of the Air Force Research Laboratory of Edwards Air Force Base. As part of these efforts, two electrical resistivity tomography (ERT) surveys- AFRL9 and AFRL10- were collected in the vicinity of the Mound Fault identified by Cyr and Miller (2023) to better determine the position of these faults. Electrical resistivity tomography is a direct current geophysical method that is used to estimate the subsurface distribution of the electrical resistivity (measured in ohm-meters; ohm-m) of a material, and is based on the...
View more...
ScienceBase brings together the best information it can find about USGS researchers and offices to show connections to publications, projects, and data. We are still working to improve this process and information is by no means complete. If you don't see everything you know is associated with you, a colleague, or your office, please be patient while we work to connect the dots. Feel free to contact sciencebase@usgs.gov.