Skip to main content
Advanced Search

Filters: Contacts: Joshua (Contractor) C Woda (X)

3 results (40ms)   

View Results as: JSON ATOM CSV
This page contains horizontal-to-vertical spectral ratio (HVSR) data for 86 measurements, LVHVSR1 through LVHVSR97. In October and November of 2016 and 2017, the U.S. Geological Survey collected horizontal-to-vertical spectral ratio (HVSR) data at 104 sites in the Genesee Valley, Livingston County, New York as part of a saline-groundwater investigation in cooperation with the New York State Department of Environmental Resources. The HVSR technique, commonly referred to as the passive-seismic method, is used to estimate the thickness of unconsolidated sediments and the depth to bedrock (Lane and others, 2008). The passive-seismic method uses a single, broad-band three-component (two horizontal and one vertical)...
This page contains horizontal-to-vertical spectral ratio (HVSR) data for 28 measurements, LVHVSR1 through LVHVSR97. In October and November of 2016 and 2017, the U.S. Geological Survey collected horizontal-to-vertical spectral ratio (HVSR) data at 104 sites in the Genesee Valley, Livingston County, New York as part of a saline-groundwater investigation in cooperation with the New York State Department of Environmental Resources. The HVSR technique, commonly referred to as the passive-seismic method, is used to estimate the thickness of unconsolidated sediments and the depth to bedrock (Lane and others, 2008). The passive-seismic method uses a single, broad-band three-component (two horizontal and one vertical)...
thumbnail
In October and November of 2016 and 2017, the U.S. Geological Survey collected horizontal-to-vertical spectral ratio (HVSR) data at 104 sites in the Genesee Valley, Livingston County, New York as part of a saline-groundwater investigation in cooperation with the New York State Department of Environmental Resources. The HVSR technique, commonly referred to as the passive-seismic method, is used to estimate the thickness of unconsolidated sediments and the depth to bedrock (Lane and others, 2008). The passive-seismic method uses a single, broad-band three-component (two horizontal and one vertical) seismometer to record ambient seismic noise. In areas that have a strong acoustic contrast between the bedrock and overlying...
    map background search result map search result map Horizontal-to-Vertical Spectral Ratio and Depth-to-Bedrock Data for Saline-Groundwater Investigation in the Genesee Valley, New York, October-November 2016 and 2017 Sites LVHVSR1 to LVHVSR97: Horizontal-to-Vertical Spectral Ratio and Depth-to-Bedrock Data for Saline-Groundwater Investigation in the Genesee Valley, New York, October-November 2016 and 2017 Sites LVHVSR100 to LVHVSR145: Horizontal-to-Vertical Spectral Ratio and Depth-to-Bedrock Data for Saline-Groundwater Investigation in the Genesee Valley, New York, October-November 2016 and 2017 Horizontal-to-Vertical Spectral Ratio and Depth-to-Bedrock Data for Saline-Groundwater Investigation in the Genesee Valley, New York, October-November 2016 and 2017 Sites LVHVSR1 to LVHVSR97: Horizontal-to-Vertical Spectral Ratio and Depth-to-Bedrock Data for Saline-Groundwater Investigation in the Genesee Valley, New York, October-November 2016 and 2017 Sites LVHVSR100 to LVHVSR145: Horizontal-to-Vertical Spectral Ratio and Depth-to-Bedrock Data for Saline-Groundwater Investigation in the Genesee Valley, New York, October-November 2016 and 2017