Skip to main content
Advanced Search

Filters: Types: OGC WFS Layer (X) > Types: Map Service (X) > partyWithName: U.S. Geological Survey - ScienceBase (X) > Categories: Data (X) > Types: Downloadable (X) > partyWithName: Natural Hazards (X) > partyWithName: PCMSC Science Data Coordinator (X) > partyWithName: Bruce M Richmond (X)

9 results (9ms)   

View Results as: JSON ATOM CSV
This dataset consists of rate-of-change statistics for the shorelines at Barter Island, Alaska for the time period 1947 to 2020. Rate calculations were computed within a GIS using the Digital Shoreline Analysis System (DSAS) version 5.0, an ArcGIS extension developed by the U.S. Geological Survey. A reference baseline was used as the originating point for the orthogonal transects cast by the DSAS software. The transects intersect each shoreline establishing measurement points, which are then used to calculate shoreline change rates.
thumbnail
This portion of the data release contains information on cores that were collected by the U.S. Geological Survey in Kahana Valley, O'ahu, Hawaii in 2015 and 2017. Sites were cored in order to describe wetland stratigraphy and to identify potential tsunami deposits. These cores contain mud, peat, fluvial sands, and marine carbonate sands, reflecting deposition in a variety of coastal environments. PDF files describe twenty-four (24) gouge and ‘Russian’ cores (hand held, side-filling peat augers) that were collected and described in the field. Cores collected in 2017 were described using the Troels-Smith sediment classification scheme (Troels-Smith, 1955; Nelson, 2015). Another pdf file (Kahana_cores_legend.pdf) contains...
thumbnail
This portion of the data release contains information on vibracores that were collected by the U.S. Geological Survey in Pololu Valley, Island of Hawai'i in 2014. Five sites were cored in order to describe wetland stratigraphy and to identify potential tsunami deposits. These vibracores contain mud, peat, fluvial sands, and marine volcanic sands, reflecting deposition in a variety of coastal environments. Two (2) pdf files (VC1.pdf, VC2.pdf) describe vibracores that were split, imaged by a line-scanner camera, scanned to generate computed tomagraphic (CT) images, and visually described. A detailed description of the upper 150 cm of VC1 using the Troels-Smith sediment classification scheme (Troels-Smith, 1955; Nelson,...
This dataset includes one vector shapefile delineating the position of the top edge of the coastal permafrost bluffs at Barter Island, Alaska spanning seven decades, between the years of 1950 and 2020. Bluff-edge positions delineated from a combination of aerial photography, declassified satellite photography, and very-high resolution satellite imagery can be used to quantify the movement of the bluff edge through time. These data were used to calculate rates of change every 10 meters alongshore using the Digital Shoreline Analysis System (DSAS) version 5.0. DSAS uses a measurement baseline method to calculate rate-of-change statistics. Transects are cast from the reference baseline to intersect each bluff edge...
This dataset consists of rate-of-change statistics for the coastal bluffs at Barter Island, Alaska for the time period 1950 to 2020. Rate calculations were computed within a GIS using the Digital Shoreline Analysis System (DSAS) version 5.0, an ArcGIS extension developed by the U.S. Geological Survey. A reference baseline was used as the originating point for the orthogonal transects cast by the DSAS software. The transects intersect each bluff line establishing measurement points, which are then used to calculate bluff-change rates.
This dataset includes a reference baseline used by the Digital Shoreline Analysis System (DSAS) to calculate rate-of-change statistics for the coastal bluffs at Barter Island, Alaska for the time period 1950 to 2020. This baseline layer serves as the starting point for all transects cast by the DSAS application and can be used to establish measurement points used to calculate bluff-change rates.
This dataset includes a reference baseline used by the Digital Shoreline Analysis System (DSAS) to calculate rate-of-change statistics for the shorelines near Barter Island, Alaska for the time period 1947 to 2020. This baseline layer serves as the starting point for all transects cast by the DSAS application and can be used to establish measurement points used to calculate shoreline-change rates.
This dataset includes one vector shapefile delineating the position of the shorelines at Barter Island, Alaska spanning seven decades, between the years 1947 and 2020. Shoreline positions delineated from a combination of aerial photography, declassified satellite photography, and very-high resolution satellite imagery can be used to quantify the movement of the shoreline through time. These data were used to calculate rates of change every 10 meters alongshore using the Digital Shoreline Analysis System (DSAS) version 5.0. DSAS uses a measurement baseline method to calculate rate-of-change statistics. Transects are cast from the reference baseline to intersect each shoreline, establishing measurement points used...
thumbnail
This portion of the data release contains information on vibracores that were collected by the U.S. Geological Survey in Anahola Valley, Kaua'i, Hawai'i in 2015. Sites were cored in order to identify potential tsunami deposits and describe wetland stratigraphy. These vibracores contain mud, peat, volcanic sands, and carbonate sands, reflecting deposition in a variety of coastal environments. PDF files describe eight (8) vibracores that were split, imaged by a line-scanner camera, scanned to generate computed tomagraphic (CT) images, and visually described. Another pdf file (Anahola_cores_legend.pdf) contains a core-log legend. A comma-delimited text file (Anahola_sand_thickness.csv) includes tabulated information...


    map background search result map search result map Vibracore photographs, computed tomography scans, and core-log descriptions from Anahola Valley, Kaua'i, Hawai'i Vibracore photographs, computed tomography scans, and core-log descriptions from Pololu Valley, Island of Hawaii Core descriptions and sand bed thickness data from Kahana Valley, O'ahu, Hawai'i Historical coastal bluff edge positions at Barter Island, Alaska for the years spanning 1950 to 2020 Offshore baseline generated to calculate bluff change rates for the north coast of Barter Island, Alaska Digital Shoreline Analysis System (DSAS) version 5.0 transects with bluff rate change calculations for the north coast of Barter Island Alaska, 1950 to 2020 Historical shoreline positions at Barter Island, Alaska for the years spanning 1947 to 2020 Offshore baseline generated to calculate shoreline change rates near Barter Island, Alaska Digital Shoreline Analysis System (DSAS) version 5.0 transects with shoreline rate change calculations at Barter Island Alaska, 1947 to 2020 Vibracore photographs, computed tomography scans, and core-log descriptions from Pololu Valley, Island of Hawaii Vibracore photographs, computed tomography scans, and core-log descriptions from Anahola Valley, Kaua'i, Hawai'i Core descriptions and sand bed thickness data from Kahana Valley, O'ahu, Hawai'i Offshore baseline generated to calculate bluff change rates for the north coast of Barter Island, Alaska Digital Shoreline Analysis System (DSAS) version 5.0 transects with bluff rate change calculations for the north coast of Barter Island Alaska, 1950 to 2020 Digital Shoreline Analysis System (DSAS) version 5.0 transects with shoreline rate change calculations at Barter Island Alaska, 1947 to 2020 Historical coastal bluff edge positions at Barter Island, Alaska for the years spanning 1950 to 2020 Historical shoreline positions at Barter Island, Alaska for the years spanning 1947 to 2020