Filters: Extensions: Shapefile (X) > Types: Shapefile (X) > partyWithName: U.S. Geological Survey - ScienceBase (X) > Types: OGC WMS Service (X) > Categories: Data (X) > Types: OGC WFS Layer (X) > partyWithName: U.S. Geological Survey (X)
22 results (42ms)
Filters
Date Range
Extensions Types Contacts Tag Types
|
This data release contains hourly means of climatological data collected by the U.S. Geological Survey (USGS) from 10/1/1991 to 9/30/2019 at three weather stations in the Loch Vale watershed in Rocky Mountain National Park (RMNP), Colorado. In order of increasing elevation, the three weather stations are Loch Vale meteorological station at RMNP, Colo. (Main weather station, USGS station 401719105394311) at an elevation of 2,925 meters (m) above North American Vertical Datum of 1988 (NAVD 88), Andrews Creek meteorological station at RMNP, Colo. (Andrews Creek weather station, USGS station 401723105400101) at an elevation of 2,990 m above NAVD 88 and Sharkstooth meteorological station at RMNP, Colo. (Sharkstooth weather...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: 177847,
Climatology,
Hydrology,
Rocky Mountain National Park,
The Loch,
A vented conductivity, temperature and depth sensor (CTD, InSitu Aqua Troll) was installed at site NR1 (N 47° 04’ 16.1”/W 122° 42’ 15.5”) and continuously measured water temperature, water depth, specific conductance, and salinity at 15-minute intervals from February 11, 2016 to July 18, 2016 (159 days). The sensor was replaced with a vented water-level logger (InSitu Level Troll) on July 19, 2016 and deployed until March 19, 2018 (608 days). The site is tidally influenced and located approximately 4.1 km upstream from the mouth of the Nisqually River and within the tidal prism. The elevation (NAVD88) of the top of the deployment pipe was surveyed by RTN-GPS. Tape-down measurements from the top of the pipe to the...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Billy Frank Jr. Nisqually National Wildlife Refuge,
Hydrodynamics,
Sediment,
Thurston County,
salinity,
This dataset accompanies the publication, 'In situ LA-ICPMS U-Pb dating of cassiterite without a known-age matrix-matched reference material: Examples from worldwide tin deposits spanning the Proterozoic to Tertiary', published in Chemical Geology (https://doi.org/10.1016/j.chemgeo.2018.03.008), which reports a LA-ICPMS analytical procedure for dating cassiterite, a main ore mineral in tin deposits, with no need for an independently dated matrix-matched cassiterite standard.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Bolivia,
Brazil,
China,
Geochemistry,
Geology, Geophysics, and Geochemistry Science Center,
This release is an update to the online "Quaternary fault and fold database" for Washington State. The online database was last updated for Washington in 2014 – this 2020 update includes newly identified and modified traces and geometries for on-shore faults gleaned from new peer-reviewed studies and mapping of active faults within the state of Washington. These data contain lines representing the location of faults with known or suspected Quaternary (<1,600,000 yrs) activity in the state of Washington. This data was compiled in conjunction with the Washington State Geological Survey. Faults are attributed following the Quaternary fault and fold database attributes, including information such as age, slip sense,...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Faulting,
Geomorphology,
Quaternary,
Seismic,
Seismology,
This data release contains information to support water quality modeling in the Delaware River Basin (DRB). These data support both process-based and machine learning approaches to water quality modeling, including the prediction of stream temperature. This section provides spatial data files that describe the rivers, reservoirs, and observational data in the Delaware River Basin included in this release. One shapefile of polylines describes the 459 river reaches that define the modeling network, and another shapefile of polygons includes the three reservoirs (Pepacton, Cannonsville, and Neversink) for which data are included in this release. Additionally, a point shapefile contains locations of monitoring sites...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: DE,
Delaware,
MD,
Maryland,
NJ,
The U.S. Geological Survey collected field spectra collected from three rivers in Alaska September 19–21, 2016, to support research on remote sensing of river discharge. Reflectance measurements were made from bridges across the Chena River, Salcha River, and Montana Creek using an Analytical Spectral Devices FieldSpec3 spectroradiometer operated in reflectance mode. The original *.asd files are provided in this data release. This data release supports the following article: Legleiter, C.J., Kinzel, P.J., and Nelson, J.M., 2017, Remote measurement of river discharge using thermal particle image velocimetry (PIV) and various sources of bathymetric information: Journal of Hydrology, v. 554, p. 490-506, https://doi.org/10.1016/j.jhydrol.2017.09.004.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Alaska,
Chena River,
Montana Creek,
Salcha River,
USGS Science Data Catalog (SDC),
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Hawaii,
Honolulu County,
Oahu,
evacuation,
modeling,
A vented water-level logger was installed at site MC1 (N 47° 05’ 12.2”/W 122° 43’ 36.8”) and continuously measured water depth and temperature at 15-minute intervals from Nov 22, 2016 to Sept 6, 2017 (288 days). This site is tidally influenced and located 1.12 km from the mouth of McAllister Creek. Elevation (NAVD88) of the water surface above the sensor was surveyed by RTN-GPS. The offset to convert all water depth time-series data to water surface elevation (NAVD88) is -1.052 m. Water depth ranged from 0.69 to 4.88 m. Temperature ranged from 2.8 to 22.5 degrees C.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Billy Frank Jr. Nisqually National Wildlife Refuge,
Hydrodynamics,
Sediment,
Thurston County,
salinity,
This publication provides digital flight line data for a high-resolution horizontal magnetic gradient and radiometric survey over the Ironton, Missouri area of southeast Missouri. Data were collected using a fixed wing aircraft with magnetometers mounted in the tail stinger and each wing tip pod and a fully calibrated gamma ray spectrometer. The survey operated out of the Farmington, Missouri airport during January to mid-February of 2016. The survey covers an irregularly shaped region within a 54 x 53 square-kilometer area centered on the town of Ironton, Missouri. Data were collected along north-south flight lines spaced 300 meters (m) apart with east-west tie lines flown every 3000 m. A mean terrain clearance...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: CGGSC,
Cedar Hill,
Crustal Geophysics and Geochemistry Science Center,
Iron Mountain,
Ironton,
This dataset has been archived; it has been superceded by version 2.0 (September 2021) which can be found at https://doi.org/10.5066/P9RUUR4L Data from 10-day sediment toxicity tests of bed sediments from the Buffalo River Area of Concern (AOC) and reference reaches on the Buffalo River upstream of the AOC, Erie County, New York, respectively. Specifically, the data was used to compare the survival and growth of two macroinvertebrate species in sediments from study sites and laboratory controls. Results are from 10-day sediment exposures of two test species, Chironomus dilutus and Hyalella azteca. Sediment samples were collected from 8 sites within the AOC and from 6 reference sites upstream of the AOC. Bed-sediments...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Aquatic Biology,
Buffalo River,
Ecological Assessment of Human and Natural Impacts,
Ecosystem Health,
Ecosystem Health,
A geodatabase containing shapefiles representing the geologic units present within the study area, as well as the locations where sampling ocurred, field photography conducted by John Armentrout ocurred, and satellite imagery providing overhead views of key points of John Armentrout's study.
Categories: Data;
Types: ArcGIS Map Package,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Coos Bay,
Coos Bay,
Micropaleontology,
Pacific Northwest,
Pacific Northwest,
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Hawaii,
Honolulu County,
Oahu,
evacuation,
modeling,
A rich legacy of geochemical data produced since the early 1960s covers the great expanse of Alaska; careful treatment of such data may provide significant and revealing geochemical maps that may be used for landscape geochemistry, mineral resource exploration, and geoenvironmental investigations over large areas. To maximize the spatial density and extent of data coverage for statewide mapping of element distributions, we compiled and integrated analyses of more than 175,000 sediment and soil samples from three major, separate sources: the U.S. Geological Survey, the National Uranium Resource Evaluation program, and the Alaska Division of Geological & Geophysical Surveys geochemical databases. Various types of...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Alaska,
Alaska,
Data Processing,
Data Series,
North America,
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Hawaii,
Honolulu County,
Oahu,
evacuation,
modeling,
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Hawaii,
Honolulu County,
Oahu,
evacuation,
modeling,
Discharge and suspended sediment data were collected from October 2016 to Febuary 2017 at the NR0 site. Data was collected immediately down stream of Old Pacific Hwy SE bridge during a bridge measurement and approximately 100 meters below bridge for a boat measurement. Data collection from the bridge has been ongoing since 1968 but data collection from a boat was first attempted October 21, 2016 during this data collection series. Suspended sediment sample and discrete discharge data at this site are available at: https://waterdata.usgs.gov/wa/nwis/inventory/?site_no=12090240&agency_cd=USGS&. A summary of suspended-sediment sample data are provided with this data release in the file NR0_SSC_summary.csv.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Billy Frank Jr. Nisqually National Wildlife Refuge,
Hydrodynamics,
Sediment,
Thurston County,
salinity,
Estimates of various low-flow statistics were computed at 51 ungaged stream locations throughout New Jersey during the 2018 water year using methods in the published reports, Streamflow Characteristics and Trends in New Jersey, Water Years 1897-2003 (Watson and others, 2005) and Implementation of MOVE.1, Censored MOVE.1, and Piecewise MOVE.1 Low-Flow Regressions with Applications at Partial-Record Streamgages in New Jersey (Colarullo and others, 2018). The estimates are computed as needed for use in water resources permitting, assessment, and management by the New Jersey Department of Environmental Protection. The data release includes the stream name, location, method of estimation, drainage area, and intended...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Estimation,
Hydrology,
Low-flow statistics,
New Jersey,
Streamflow,
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Hawaii,
Honolulu County,
Oahu,
evacuation,
modeling,
A rich legacy of geochemical data produced since the early 1960s covers the great expanse of Alaska; careful treatment of such data may provide significant and revealing geochemical maps that may be used for landscape geochemistry, mineral resource exploration, and geoenvironmental investigations over large areas. To maximize the spatial density and extent of data coverage for statewide mapping of element distributions, we compiled and integrated analyses of more than 175,000 sediment and soil samples from three major, separate sources: the U.S. Geological Survey, the National Uranium Resource Evaluation program, and the Alaska Division of Geological & Geophysical Surveys geochemical databases. Various types of...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Alaska,
Alaska,
Data Processing,
Data Series,
North America,
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Hawaii,
Honolulu County,
Oahu,
evacuation,
modeling,
|
|