Filters: partyWithName: Central Energy Resources Science Center (X) > partyWithName: Energy and Minerals (X) > Types: OGC WFS Layer (X) > partyWithName: U.S. Geological Survey - ScienceBase (X) > Types: OGC WMS Layer (X)
443 results (15ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes
|
This is a polygon file of the outcrop and area underlain by the Drip Tank Mb. of the Straight Cliffs Fm. (Upper Cretaceous) east of 112 degrees of longitude in the Kaiparowits Plateau study area, southern Utah. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Bighorn Basin Province is located in Wyoming and south central Montana. The main population centers within the study area are Cody and Thermopolis, Wyoming. The main highways, I-70 and I-90, generally traverse the area from north to south. The Bighorn River and its tributaries drain the area. The province boundary was drawn...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 34 = Bighorn Basin,
503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
This ArcView shapefile contains a polygon representation of the northern boundary of the Powder River Basin (Montana). This theme was created specifically for the National Coal Resources Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Big Horn County,
Boundary,
Montana,
NCRA Assessment Area,
Northern Powder River Basin,
This ArcView shapefile contains a polygon representation of the lateral extent of the Wyodak-Anderson coal zone in the Sheridan Coalfield. This theme was created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region
This as a shapefile and coverage showing the isopachs of total net coal in beds greater than 1.2' thick for the Fruitland Formation, San Juan Basin, Colorado and New Mexico.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Archuleta County, CO,
Coal isopach map,
Colorado,
Colorado Plateau,
Colorado Plateau,
This shapefile includes polygons that describe U.S. Geological Survey delineated Total Petroleum Systems of northern Afghanistan. Each petroleum system is defined as a mappable entity encompassing genetically related petroleum that occurs in seeps, shows and accumulations (discovered and undiscovered) that have been generated by a pod, or by closely related pods, of mature source rock, together with the essential mappable geologic elements (source, reservoir, seal and overburden rocks) that control fundamental processes of generation, migration, entrapment and preservation of petroleum. Total petroleum systems are described by U.S. Geological Survey research scientists on the basis of exploration and production...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: AF,
Afghan-Tajik basin,
Afghanistan Ministry of Mines and Industry,
Amu Darya basin,
Earth Science,
This ArcView shapefile contains a polygon representing the study area for the Wyodak-Anderson coal zone in the Powder River Basin, Wyoming and Montana. This theme was created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Big Horn County,
Campbell County,
Coal boundary,
Coal zone outcrop,
Converse County,
This is a shapefile and unioned polygon ownership coverage used to calculate coal resources of the A through D coal zones, Yampa coal field, northwestern Colorado. Polygons that have been combined include counties, 7.5' quadrangles, townships, surface and coal ownership. This ownership coverage was clipped by the largest resource boundary polygon--that of the A coal zone.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Federal mineral ownership,
Green River Basin,
Moffat County,
National Coal Resource Assessment (NCRA),
This dataset is a polygon coverage of the resource areas of the Lower Kittanning coal zone. This dataset is the digital compilation of geologic and resource maps provided mostly by State geologic surveys and depicts the projected area of occurrence of the Lower Kittanning coal bed. The Lower Kittanning coal bed is in Ohio, West Virginia, western Pennsylvania, and western Maryland and is an important economic coal bed in the northern part of the Appalachian Basin. It is of additional importance because it is one of the coal beds that has potential for coalbed methane development within the Allegheny Group throughout most of the Appalachian foreland basin in Ohio, Pennsylvania, West Virginia, and Maryland. This file...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: ALLEGANY County MD,
ALLEGHENY County PA,
ARMSTRONG County PA,
ATHENS County OH,
Appalachians,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 50210301 = Leadville McCracken,
50210302 = Pennsylvanian Carbonate Buildups and Fractured Limestones,
50210361 = Cane Creek Shale OIl,
50210362 = Cane Creek Shale Gas,
50210363 = Gothic, Chimney Rock, Hovenweep Shale Oil,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
50340261 = Muddy-Frontier Sandstone and Mowry Fractured Shale Continuous Gas,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The sand percent contours were produced by the Louisiana Geological Survey and were digitized from Chapter 11, Cenozoic, in The Gulf of Mexico Basin, Volume J, The Geology of North America (1991). The data are provided in three shapefiles--one for each stage (Lower, Middle and Upper) of the Miocene series. These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other scientific organizations. In cases where company proprietary data were used to produce various...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Earth Science,
Economic geology,
Generalized Representation of the Oil and Gas Producing Areas from the Miocene in Southern Louisiana
For each of the four Miocene sequences, polygons representing producing areas within fields were created by constructing a grid of ¼ sq. mi. cells and proximal polygons centered on all producing wells and then combining and merging the adjacent polygons having the same value for field name. Although the polygons are based on the producing wells only, they may also include some dry holes. The producing intervals were determined by comparing the depth of production to the structure contours (see metadata for the structure contours). The data are provided in four shapefiles--one for each Miocene sequence (Lower 1, Lower 2, Middle and Upper). These datasets contain basic data and interpretations developed and compiled...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Earth Science,
Economic geology,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503601 = Mowry Composite,
50360101 = Thrust Belt Conventional,
503602 = Frontier-Adaville-Evanston Coalbed Gas,
50360281 = Frontier-Adaville-Evanston Coalbed Gas,
Coalbed methane resources,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506401 = Precambrian to Cambrian,
50640101 = Precambrian to Cambrian Rift-Fill,
50640102 = Cambrian Mount Simon to Eau Claire,
50640103 = Cambrian to Ordovician Knox Group,
506402 = Ordovician Ancell Maquoketa,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane,
50330101 = Eastern Basin Margin Upper Fort Union Sandstone,
50330181 = Wasatch Formation,
50330182 = Upper Fort Union Formation,
50330183 = Lower Fort Union-Lance Formations,
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 50090101=Forbes, Kione and Older,
50090102=Lower Princeton Canyon Fill and Northern Nonmarine,
500901=Dobbins-Forbes,
50090201=Late Cretaceous Deltaic and Submarine Fan,
50090202=Shallow Marine Sands and Canyon Fill,
|
|
