Filters: Contacts: {oldPartyId:78713} (X)
71 results (75ms)
Filters
Date Range
Contacts
Tag Types Tag Schemes |
LANDFIRE's (LF) Annual Disturbance products provide temporal and spatial information related to landscape change. Annual Disturbance depicts areas of 4.5 hectares (11 acres) or larger that have experienced a natural or anthropogenic landscape change (or treatment) within a given year. For the creation of the Annual Disturbance product, information sources include national fire mapping programs such as Monitoring Trends in Burn Severity (MTBS), Burned Area Reflectance Classification (BARC) and Rapid Assessment of Vegetation Condition after Wildfire (RAVG), 18 types of agency-contributed "event" perimeters (see LF Public Events Geodatabase), and remotely sensed Landsat imagery. To create the LF Annual Disturbance...
LANDFIRE's (LF) 2022 13 Anderson Fire Behavior Fuel Models (FBFM13) product represents distinct distributions of fuel loadings found among surface fuel components (live and dead), size classes, and fuel types (Anderson 1982). The fuel models are described by the most common fire carrying fuel type (grass, brush, timber, or slash), loading and surface area-to-volume ratio by size class and component, fuel bed depth, and moisture of extinction. LF FBFM13 can be used for fire spread related characteristic models. To create this product, expert rulesets were developed to understand how different types of disturbance would change pre-disturbance fuel models to post disturbance fuels, based on the severity and time since...
LANDFIRE's (LF) 2022 Canopy Bulk Density (CBD) describes the mass of available canopy fuel per unit canopy volume that would burn in a crown fire. A spatially explicit map of CBD supplies information used in fire behavior models to determine the spread characteristics of active crown fires across the landscape. CBD for disturbed and non-disturbed areas is determined via a general linear model (GLM) relating Canopy Height (CH) and Canopy Cover (CC) to CBD (Reeves et al 2009). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CBD is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the...
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Cover (EVC) represents the vertically projected percent cover of the live canopy for a 30-m cell. EVC is produced separately for tree, shrub, and herbaceous lifeforms. Training data depicting percentages of canopy cover are obtained from plot-level ground-based visual assessments and lidar observations. These are combined with Landsat imagery (from multiple seasons), to inform models built independently for each lifeform. Tree, shrub, and herbaceous lifeforms each have a potential range from 10% to 100% (cover values less than 10% are binned into the 10% value). The three independent lifeform datasets are merged into a single product based on the dominant...
LANDFIRE's (LF) 2022 40 Scott and Burgan Fire Behavior Fuel Models (FBFM40) product represents distinct distributions of fuel loadings found among surface fuel components (live and dead), size classes, and fuel types (Scott and Burgan 2005). The fuel models are described by the most common fire carrying fuel type (grass, brush, timber, or slash), loading and surface area-to-volume ratio by size class and component, fuel bed depth, and moisture of extinction. FBFM40 contains more fuel models for every fuel type than 13 Anderson Fire Behavior Fuel Models (FBFM13), and the number of fuel models representing relatively high dead fuel moisture content is increased. In FBFM40 fuel models with an herbaceous component are...
LANDFIRE’s (LF) 2022 Vegetation Departure (VDep) product categorizes departure between current vegetation condition and reference vegetation condition, according to the methods outlined in the Interagency Fire Regime Condition Class Guidebook (FRCC Guidebook (Hann et al 2010)). VDep differs from the FRCC Guidebook, however, because it is based on the departure of current vegetation condition only, whereas the FRCC Guidebook approach includes departure of current fire regimes for the reference period. For VDep, summary units are defined as a BioPhysical Setting (BpS) with identical reference condition values regardless of map zone. For example, when a BpS is present in map zone 1, 2, 4, 5, 6 and 8, the reference...
LANDFIRE's (LF) 2022 Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create this product, plot level CH values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance Canopy Cover and CH are used as predictors of disturbed CH using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and time since...
LANDFIRE (LF) disturbance products are developed to provide temporal and spatial information related to landscape change. Historical Disturbance (HDist) is developed from the base annual LF disturbance products, and attribute code system, to represent the history of disturbance for a 10-year span. Each year's disturbance scenarios are checked against time relevant LF vegetation products to check for logical inconsistencies. Errant codes are flagged and updated to a discard code with the remaining disturbance types cross-walked/aggregated to Fuel Disturbance (FDist) types. HDist includes the year of disturbance that is recorded for that pixel. In LF 2022, the time since disturbance code is the same for both HDist...
LANDFIRE’s (LF) Annual Disturbance products provide temporal and spatial information related to landscape change. Annual Disturbance depicts areas of 4.5 hectares (11 acres) or larger that have experienced a natural or anthropogenic landscape change (or treatment) within a given year. For the creation of the Annual Disturbance product, information sources include national fire mapping programs such as Monitoring Trends in Burn Severity (MTBS), Burned Area Reflectance Classification (BARC) and Rapid Assessment of Vegetation Condition after Wildfire (RAVG), 18 types of agency-contributed “event” perimeters (see LF Public Events Geodatabase), and remotely sensed Landsat imagery. To create the LF Annual Disturbance...
LANDFIRE's (LF) 2022 13 Anderson Fire Behavior Fuel Models (FBFM13) product represents distinct distributions of fuel loadings found among surface fuel components (live and dead), size classes, and fuel types (Anderson 1982). The fuel models are described by the most common fire carrying fuel type (grass, brush, timber, or slash), loading and surface area-to-volume ratio by size class and component, fuel bed depth, and moisture of extinction. LF FBFM13 can be used for fire spread related characteristic models. To create this product, expert rulesets were developed to understand how different types of disturbance would change pre-disturbance fuel models to post disturbance fuels, based on the severity and time since...
LANDFIRE (LF) 2022 Fuel Vegetation Height (FVH) represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance...
LANDFIRE's (LF) 2022 Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. CC supplies information for fire behavior models to determine the probability of crown fire initiation, provide input in the spotting model, calculate wind reductions, and to calculate fuel moisture conditioning. To create this product, plot level CC values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance CC and Canopy Height (CH) are used as predictors of disturbed CC using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and...
LANDFIRE’s (LF) 2022 Vegetation Condition Class (VCC) is a reclassification and categorization of the LF 2022 Vegetation Departure (VDep) product. VCC indicates the general level to which current vegetation is different from the simulated historical reference condition. Therefore, VCC is a derivative of VDep; the VDep product indicates how different current vegetation is compared to the estimated historical reference condition, and is based on change to species composition, structure, and canopy closure. To learn more about VCC and VDep go to https://www.landfire.gov/fireregime.php. Condition classes for VCC are defined in two ways; the original 3 category system from Fire Regime Condition Class Guidebook (FRCC...
LANDFIRE (LF) disturbance products are developed to provide temporal and spatial information related to landscape change. LF 2022 Fuel Disturbance (FDist) uses the latest Annual Disturbance products from the effective disturbance years of 2013 to 2022. FDist is created from LF 2022 Historical Disturbance (HDist) which in turn aggregates the Annual Disturbance products. FDist groups similar disturbance types, severities and time since disturbance categories which represent disturbance scenarios within the fuel environment. FDist is used in conjunction with Fuel Vegetation Type (FVT), Cover (FVC), and Height (FVH) to calculate Canopy Cover (CC), Canopy Height (CH), Canopy Bulk Density (CBD), Canopy Base Height (CBH),...
LANDFIRE (LF) 2022 Fuel Vegetation Height (FVH) represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance...
LANDFIRE's (LF) Annual Disturbance products provide temporal and spatial information related to landscape change. Annual Disturbance depicts areas of 4.5 hectares (11 acres) or larger that have experienced a natural or anthropogenic landscape change (or treatment) within a given year. For the creation of the Annual Disturbance product, information sources include national fire mapping programs such as Monitoring Trends in Burn Severity (MTBS), Burned Area Reflectance Classification (BARC) and Rapid Assessment of Vegetation Condition after Wildfire (RAVG), 18 types of agency-contributed "event" perimeters (see LF Public Events Geodatabase), and remotely sensed Landsat imagery. To create the LF Annual Disturbance...
LANDFIRE's (LF) Annual Disturbance products provide temporal and spatial information related to landscape change. Annual Disturbance depicts areas of 4.5 hectares (11 acres) or larger that have experienced a natural or anthropogenic landscape change (or treatment) within a given year. For the creation of the Annual Disturbance product, information sources include national fire mapping programs such as Monitoring Trends in Burn Severity (MTBS), Burned Area Reflectance Classification (BARC) and Rapid Assessment of Vegetation Condition after Wildfire (RAVG), 18 types of agency-contributed "event" perimeters (see LF Public Events Geodatabase), and remotely sensed Landsat imagery. To create the LF Annual Disturbance...
LANDFIRE's (LF) 2022 Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. CC supplies information for fire behavior models to determine the probability of crown fire initiation, provide input in the spotting model, calculate wind reductions, and to calculate fuel moisture conditioning. To create this product, plot level CC values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance CC and Canopy Height (CH) are used as predictors of disturbed CC using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and...
LANDFIRE’s (LF) Annual Disturbance products provide temporal and spatial information related to landscape change. Annual Disturbance depicts areas of 4.5 hectares (11 acres) or larger that have experienced a natural or anthropogenic landscape change (or treatment) within a given year. For the creation of the Annual Disturbance product, information sources include national fire mapping programs such as Monitoring Trends in Burn Severity (MTBS), Burned Area Reflectance Classification (BARC) and Rapid Assessment of Vegetation Condition after Wildfire (RAVG), 18 types of agency-contributed "event" perimeters (see LF Public Events Geodatabase), and remotely sensed Landsat imagery. To create the LF Annual Disturbance...
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Type (EVT) represents the current distribution of the terrestrial ecological systems classification developed by NatureServe for the western hemisphere. In this context, a terrestrial ecological system is defined as a group of plant community types that tend to co-occur within landscapes with similar ecological processes, substrates, and/or environmental gradients. EVT also includes ruderal or semi-natural vegetation types within the U.S. National Vegetation Classification [(NVC) https://usnvc.org/]. See the EVT product page (https://www.landfire.gov/evt.php) for more information about ecological systems and NVC classifications. EVT is mapped using decision...
|
![]() |