Skip to main content
Advanced Search

Filters: partyWithName: Virginia L McGuire (X) > partyWithName: Lower Mississippi-Gulf Water Science Center (X)

10 results (10ms)   

View Results as: JSON ATOM CSV
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Groundwater-level data, in conjunction with attendant metadata and covariates (predictor variables) data, for the Mississippi River Valley alluvial aquifer (MRVA) are used to support statistical and process-based numerical modeling. This page represents a collection of groundwater-level data within the expanse of the Mississippi Alluvial Plain (MAP) (Painter and Westerman, 2018) and are derived from well-specific periods of record of discrete measurements and continuous water levels aggregated to daily statistics. The basic data structures are intended also to serve as interpretability standards for use by statistical software such as described by Asquith and Seanor (2019) and Asquith and others (2019).
thumbnail
A potentiometric-surface map for spring 2020 was created for the Mississippi River Valley alluvial aquifer (MRVA), which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. The location and water-level altitude in feet for these wells and streamgages in spring 2020 are provided in this data release. The interpreted contours and raster of the potentiometric surface are also provided in this data release and in the associated report titled "Potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2020" and available at https://doi.org/10.3133/sim3478/.
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric-surface map for spring 2018 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric-surface map for 2018 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...


    map background search result map search result map Data associated with potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (a) Groundwater altitude data, from monitoring-networks wells, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (b) Groundwater altitude data, from driller-measured wells, considered for the potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (c) Surface-water altitude data, from streamgages, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (d) Spatial data set of the potentiometric surface contours, Mississippi River Valley alluvial aquifer, spring 2016, in feet (e1) Potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016, raster format, in feet (e2) Potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016, raster format, in meters (b) Groundwater altitude data, from driller-measured wells, considered for the potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 Data associated with potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (a) Groundwater altitude data, from monitoring-networks wells, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (c) Surface-water altitude data, from streamgages, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (d) Spatial data set of the potentiometric surface contours, Mississippi River Valley alluvial aquifer, spring 2016, in feet (e1) Potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016, raster format, in feet (e2) Potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016, raster format, in meters