Filters: partyWithName: U.S. Geological Survey - CERSC Data Management Services Project (X)
508 results (11ms)
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes |
This dataset represents lineaments in the Powder River Basin as identified in the following publication: Maughan, E.K., and Perry, W.J., Jr., 1986, Lineaments and their tectonic implications in the Rocky Mountains and adjacent plains region: in Peterson, J.A., ed, Paleotectonics and Sedimentation in the Rocky Mountain Region, United States: American Association of Petroleum Geologists Memoir 41, pp. 41-56. A lineament is defined as a linear topographic feature of regional extent that is believed to reflect crustal structure (Hobbs et al., 1976, p. 267). Lineament features were transferred from the publication to a hard-copy base map by province geologist, then digitized and referenced for use in a Geographic Information...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane,
50330101 = Eastern Basin Margin Upper Fort Union Sandstone,
50330181 = Wasatch Formation,
50330182 = Upper Fort Union Formation,
50330183 = Lower Fort Union-Lance Formations,
This shapefile contains polylines that describe the location of seismic lines in northern Afghanistan for which digital seismic profiles in seg-y format are available from the Afghanistan Ministry of Mines and Industry Joint Oil and Gas Resource Assessment Team.
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province, and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500101 = Brookian Coalbed Gas Composite,
50010181 = Nanushuk Formation Coalbed Gas,
50010182 = Prince Creek-Tuluvak Formations Coalbed Gas,
50010183 = Sagavanirktok Formation Coalbed Gas,
AK,
Point locations of six coal mines in the southern Wasatch Plateau.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado Plateau,
USGS Science Data Catalog (SDC),
Utah,
Wasatch Plateau,
coal,
This is a shapefile and the final unioned polygon coverage used to calculate coal resources of the lower Blackhawk Formation in the southern Wasatch coal assessment area. Polygons that make up the final unioned polygons include counties, 7.5' quadrangles, townships, surface and coal ownership, reliability, overburden categories, and net coal thickness categories. The final unioned coverage was clipped by the resource boundary polygon, which is described in the metadata file for the shapefile WS_BND.
This file contains geologic units of the southern Wasatch Plateau represented as polygons.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorada Plateau,
USGS Science Data Catalog (SDC),
Utah,
Wasatch Plateau,
Wasatch Plateau,
This is a shapefile and coverage showing the isopachs of total net coal in beds greater than or equal to 1.2' thick in the lower Blackhawk Formation, southern Wasatch Plateau coal assessment area.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado Plateau,
Emery County,
National Coal Resource Assessment (NCRA),
Sanpete County,
Sevier County,
This is a polygon coverage of the outcrop of the John Henry Member of the Straight Cliffs Formation east of 112 degrees of longitude in the Kaiparowits Plateau, southern Utah. This polygon was used to represent the areas underlain by the Calico Sequence boundary. This polygon was also used as the "outside" clipping polygon for several of the data layers including the overburden and isopach coverages. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 02 = Yukon Flats,
500201 = Tertiary Composite,
50020101 = Tertiary Sandstone,
50020102 = Subthrust,
50020103 = Crooked Creek,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles....
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Contours,
Earth Science,
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles....
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Contours,
Earth Science,
These ArcView shapefiles contain representations of numerous themes associated with the Ferris coal zones in the Ferris coalfield, Hanna Basin, Wyoming. The purpose of these shapefiles is to allow for multiple theme queries. These datasets were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Carbon County,
Coal,
Ferris 23 coal zone,
Ferris 23 study limit,
Ferris 25 coal zone,
This is a polygon coverage and shapefile that contains undivided Upper Cretaceous rocks that include (in descending order) the Smoky Hollow and Tibbet Canyon Mbs. of the Straight Cliffs Fm., and the Tropic Shale and Dakota Fm. This coverage shows where these rocks are exposed along the outcrop and are buried in the subsurface in the Kaiparowits Plateau study area, southern Utah. The base of the Dakota Fm. was used to define the Kaiparowits Plateau for areas east of 112 degrees of longitude. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
The drilling history documents oil and gas wells in the Lower Miocene 1 sequence as a whole and in 10-year intervals. The wells included in this interval are determined by completion date and by comparing the depth of the wells to structure contours of the Lower Miocene 1 sequence. The data are provided in a single file (lm1_prod.shp) as well as eight 10-year interval files covering 1920 through 1999. These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Earth Science,
Economic geology,
The drilling history documents oil and gas wells in the Lower Miocene 2 sequence as a whole and in 10-year intervals. The wells included in this interval are determined by completion date and by comparing the depth of the wells to structure contours of the Lower Miocene 2 sequence. The data are provided in a single file (lm2_prod.shp) as well as nine 10-year interval files covering 1910 through 1999. These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Earth Science,
Economic geology,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Eastern Oregon-Washington Province is located in eastern Oregon and eastern Washington, encompassing all or parts of Baker, Clackamas, Crook, Deschutes, Gilliam, Grant, Harney, Hood River, Jefferson, Linn, Malheur, Marion, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco, Wheeler Counties in Oregon and all or parts of Adams,...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 05 = Eastern Oregon-Washington,
500501 = Creataceous-Tertiary Composite,
50050101 = Eastern Oregon and Washington Conventional Gas,
50050102 = Republic Graben Gas,
50050161 = Columbia Basin Convention Gas,
|
|