Filters: partyWithName: Water Resources (X)
Folder: ROOT ( Show direct descendants )
431 results (155ms)
LocationFilters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
Vegetation classification model (Veg) and associated metadata for basin A1.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Colorado,
Rio Blanco,
UAS,
Unmanned Aerial Systems,
biota,
Digital terrain model (DTM) and associated metadata for basin B1.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Colorado,
Rio Blanco,
UAS,
Unmanned Aerial Systems,
biota,
Final surface model (SRF) and associated metadata for basin B1.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Colorado,
Rio Blanco,
UAS,
Unmanned Aerial Systems,
biota,
These data were collected during a travel time and dissolved oxygen study along a 1-mile reach of the Blue River downstream from 58th Street in Kansas City, Missouri. The study was a cooperative effort between the U.S. Geological Survey (USGS), the U.S. Environmental Protection Agency Urban Waters Federal Partnership program, and the Kansas City, Missouri, Water Services Department. This is part of a larger USGS effort supporting the Middle Blue River Basin Urban Waters Federal Partnership. This data release contains continuous water-quality measurements (Blue_River_CQWM.csv), rhodamine dye sensor data (Blue_River_dye_profiles.csv), analytical data from synoptic water-quality samples (Blue_River_QWDATA.csv), manual...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Blue River,
Kansas City,
Missouri,
USGS Science Data Catalog (SDC),
Water Quality,
Using publicly available data for Erie and Niagara counties, New York, a series of geospatial overlays were created at 1:24,000 scale to examine the bedrock geology, groundwater table, soils, and surficial geology. Bedrock and surficial geology were refined using extant bedrock maps, well and borehole data from water- and gas-wells, soil data, and lidar data. Groundwater data were collected from New York State Department of Environmental Conservation and U.S. Geological Survey water-well databases to estimate the groundwater table. Soil data were used to examine soil thickness over bedrock and infiltration. An inventory of closed depressions was created using reconditioned lidar-derived bare-earth digital elevation...
This child item data set provides high-resolution, nearshore, spatial water-quality data collected from Owasco Lake, New York, on June 26 and October 8, 2019. All data are reported as raw measured values. Continuous water-quality monitors were mounted to a boat at approximately 0.5-meters below the water surface and used to measure nitrate, chlorophyll fluorescence (fChl), fluorescent dissolved organic matter (fDOM), dissolved oxygen, specific conductance, phycocyanin fluorescence (fPC), turbidity, pH, and temperature.
Categories: Data;
Tags: Contaminants, HABS,
Finger Lakes,
New York,
Owasco Lake,
Surface-Water Quality Monitoring,
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2018 to February 2019 along 16,816 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different helicopter-borne sensors: the CGG Canada Services, Ltd. Resolve frequency-domain AEM instrument that is used to map subsurface geologic structure at depths up to 100 meters, depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that...
The U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers Engineer Research and Development Center and the U.S. Environmental Protection Agency, developed a predictive, mechanistic, three-dimensional hydrodynamic model for the St. Louis River Estuary (SLRE), Minnesota. This model was developed with Environmental Fluid Dynamics Code (EFDC), a grid-based, surface-water modeling package for simulating three-dimensional circulation, mass transport, sediments, and biogeochemical processes. The new model predicts discharge, water-surface elevations, flow velocity, and water temperature. The model was calibrated using data collected from April 2016 through November 2016 and validated with...
This child item contains ground penetrating radar (GPR) data collected over a small alpine wetland between Mogul Mine and Cement Creek located near Silverton, Colorado. Mine-impacted water is transported to Cement Creek via surface channels and groundwater through this wetland. The GPR method transmits radar pulses into the ground and measures the returned amplitude from these pulses over time. Variations in subsurface electromagnetic (EM) properties (dielectric permittivity, electrical conductivity, and magnetic susceptibility) affect the timing and amplitude of returned radar energy. For example, variation in water or mineral content are physical properties that often influence the EM properties that are observed...
This child item dataset contains a single horizontal-to-vertical spectral ratio (HVSR) measurement from Delaware County, New York, DHVSR8. Raw and processed HVSR data for this HVSR measurement are included in a zipped directory named by the measurement site identifier. The HVSR data-collection sites are designated by a county sequential numbering system (DHVSR8, etc. where "D" indicates Delaware County).
This child page contains eight csv files, site_flow, which contain daily streamflow values for each site. Each file includes a station identifier, date of observation, measured value of streamflow and qualifier code for the measured value. The format of the csv file (date format and column headings) is designed to meet the specific requirements of file format for R-QWTREND. If csv files are opened directly in excel, the format of the data can change. To ensure the data are in the proper format for R-QWTREND, files should be opened in a text editor. The "site" in site_flow can be cross-referenced to the main report by downloading the zipped folder HRtrend folder from child page, "Scripts to run R-QWTREND models and...
The datasets provided here are the input data used to run the Seasonal Kendall Trend (SKT) tests and Weighted Regressions on Time, Discharge, and Season (WRTDS) models. SKT tests use "annualSamplingFreqs_allSites.csv" and "wqData_screenedSitesAll.csv" which includes, for all site-parameter combinations, information on annual sampling frequencies and the screened water-quality data, respectively. The WRTDS models use "DRB.wqdata.20200521.csv", "DRB.flow.20200610.zip", and "DRB.info.20200521.csv" for calibration which includes, for all site-parameter combinations, the water-quality data, streamflow data (as separate .csv files for each site), model specifications and site information, respectively. The multisource...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Ammonia,
Calcium,
Chloride,
Delaware,
Delaware River,
This child item dataset contains a shapefile of labels for hydrogeologic sections illustrated in Heisig, 2023 (figure 3, plate 1). The "Sec_ID" attribute lists letter-number designations for the ends of each section. Hydrogeologic section labels are in the format x - x'. By convention, the x is on the west side and the x' is on the east side of generally horizontal sections. In generally vertical sections, the x is the westernmost of the section ends and the x' is the eastermost end of the section line.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Aquifer Mapping,
Basin & Hydrogeologic Characterization,
Cayuga County,
Freeville,
Groton,
This data release has been deprecated. Please see new data release here: https://doi.org/10.5066/P9CIK9ZF. This data release documents the digital data used to produce flood-inundation maps for a range of gage heights (stages) for the Sabinal River near Utopia, Tex. The simulated flood-inundation maps correspond to a range in stage from 7 to 24 feet (ft) at U.S. Geological Survey (USGS) streamgage 08197970 Sabinal River at Utopia, Tex. at intervals of 0.5-ft. The maps were created for a 10-mile reach of the Sabinal River from USGS streamgage 08197936 Sabinal River below Mill Creek near Vanderpool, Tex., at the upstream boundary of the study reach, to USGS streamgage 08197970 Sabinal River at Utopia, Tex. (hereinafter...
The California State Water Resources Control Board (State Water Board) initiated the Oil and Gas Regional Monitoring Program (RMP) to assess effects of oil and gas development on groundwater designated for any beneficial use. The U.S. Geological Survey (USGS) is the technical lead in conducting the RMP through the California Oil, Gas, and Groundwater (COGG) Program, working in cooperation with the State Water Board, and in partnership with other State and local agencies. The USGS collected and analyzed groundwater, surface water, and associated quality control (QC) samples in the Poso Creek Oil Field study area during February 2020-December 2021. Groundwater samples were collected from eleven irrigation, two domestic,...
This dataset presents the total estimated monthly public-supply water withdrawal by 12-digit hydrologic unit code (HUC12) in the conterminous United States for 2015. Public-supply water use was estimated by spatially and temporally downscaling available data from each state. The total represents combined groundwater and surface water withdrawals for 83,178 watersheds. Public supply refers to water withdrawn by public and private water suppliers that provide water for cities, towns, rural water districts, mobile-home parks, Native American Indian reservations, and military bases. Public-supply facilities are classified under the Standard Industrial Classification (SIC) 4941 and provide water to at least 25 people...
This data release contains dissolved cyanotoxin concentrations for microcystins (MC), cylindrospermopsins (CYL), anatoxins (ATX), and saxitoxins (STX) assessed using enzyme-linked immunosorbent assays (ELISA) and liquid chromatography-mass spectrometry or tandem mass spectrometry (LC-MS and LC-MS/MS, respectively) in extracts from SPATT (n=95) and DGT samplers (n=10) deployed on three Finger Lakes (Owasco, Seneca, and Skaneateles) between June and November 2019. Relative percent contributions of microcystin congeners are also provided for samples analyzed by LC-MS and LC-MS/MS. Solid phase adsorption toxin tracking (SPATT) and diffusive gradients in thin-films (DGT) are types of passive environmental samplers containing...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Contaminants, HABS,
Finger Lakes,
New York,
Owasco Lake,
Owasco Lake Platform (Site ID: 425327076313601),
This dataset includes spreadsheets with statistical data (mean and median absolute error) used in deciding which interpolation method best fit the corresponding dataset. All statistical data were paired with a visual inspection of the interpolation prior to determining the final raster product. All spreadsheets were generated using an automated python script (Jahn, 2020).
This dataset includes well logs used in the creation of the Cortland hydrogeologic framework. Well logs were used from multiple sources (DEC, DOT, NWIS) and were a crucial component in generating hydrogeologic layer elevations and thicknesses. Well logs are available in their original form on GeoLog Locator (https://webapps.usgs.gov/GeoLogLocator/#!/) and provided here in the digitized form (shapefiles and feature classes), which were used in the generation of the hydrogeologic framework.
Digital hydrogeologic datasets were developed for the Rondout-Neversink study area in upstate New York in cooperation with the New York State Department of Environmental Conservation. These datasets define the hydrogeologic framework of the valley-fill aquifer and surrounding till-covered uplands within the study area. Datasets include: bedrock elevation raster, lacustrine silt and clay top and bottom elevation rasters, lidar minimum elevation raster, lacustrine extent polygon, valley-fill extent polygon, and surficial geology polygons. Elevation layers were interpolated at 125-foot discretization to match the model grid cell size.
|
|
