Filters: Types: GeoTIFF (X) > Extensions: ArcGIS Service Definition (X)

Folders: ROOT > ScienceBase Catalog > USGS Data Release Products ( Show direct descendants )

Location Folder Show Tree ROOT _ScienceBase Catalog __USGS Data Release Products 09471143 - Walnut Gulch below ARS Flume 6, near Tombstone, AZ - 07/28/2017 Flow Event Data 12-digit hydrologic unit outlet (pour) points for the NHDPlus V2.1 WBD snapshot 1992 digital surface model and orthomosaic of Malakoff Diggins State Historic Park, California 2010-2017 zooplankton data from whole water-column tows in Lakes Michigan and Huron 2013 East Bay Seismic Experiment (EBSE) -- Implosion Data, Hayward, Calif More... Filters Date Range Past year (1) Past month (0) Past week (0) Past day (0) Custom range... To   Search Extensions Raster (4) Types ArcGIS REST Map Service (17) ArcGIS Service Definition (17) Downloadable (17) Map Service (17) Citation (10) More... Contacts John R. Olson U.S. Geological Survey - ScienceBase Desert Research Institute U.S. Geological Survey - ScienceBase C. P. Hawkins More... Categories Data (17) Map (10) Data Release - Revised (1) Tag Types Theme (15) Place (17) Harvest Set (7) Label (2) USGS Scientific Topic Keyword (5) Subject (2) CMS Level 4 Topics (2) More... Tag Schemes None (12) USGS Thesaurus (5) Common geographic areas (4) Getty Thesaurus of Geographic Names (1) Marine Realms Information Bank (MRIB) keywords (2) ISO 19115 Topic Category (5) https://www.sciencebase.gov/vocab/category/WRET/CMS_Themes/NYWSC_CMS_Themes (2) More... View Results as: JSON ATOM CSV Browse Folder

LEAN-corrected San Francisco Bay Digital Elevation Model, 2018 Lidar-derived digital elevation models often contain a vertical bias due to vegetation. In areas with tidal influence the amount of bias can be ecologically significant, for example, by decreasing the expected inundation frequency. We generated a corrected digital elevation mode (DEM) for tidal marsh areas around San Francisco Bay using the Lidar Elevation Adjustment with NDVI (LEAN) technique (Buffington et al. 2016). Survey-grade GPS survey data (6614 points), NAIP-derived Normalized Difference Vegetation Index, and original 1 m lidar DEM from 2010 were used to generate a model of predicted bias across tidal marsh areas. The predicted bias was then subtracted from the original lidar DEM and merged with the NOAA... Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, Raster; Tags: Remote Sensing, San Francisco Bay, USGS Science Data Catalog (SDC), biota, digital elevation models, All tags... estuary, lidar, wetlands, Fewer tags Reptile Richness in the Range of the Sage-grouse, Derived From Species Range Maps These data depict reptile species richness within the range of the Greater Sage-grouse. Species boundaries were defined as the total extent of a species geographic limits. This raster largely used species range data from "U.S. Geological Survey - Gap Analysis Project Species Range Maps CONUS_2001", however in order for a more complete picture of species richness, additional sources were used for species missing from the Gap Analysis program. Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, Raster; Tags: Arizona, California, Class Chelonia, Class Reptilia, Class Testudines, All tags... Colorado, Ecology, Idaho, Lizard, Montana, Nevada, New Mexico, North America, Order Squamata, Oregon, Snake, Species Richness, Squamate, Turtle, USGS Science Data Catalog (SDC), United States, Utah, Washington, Wildlife Biology, Wyoming, biogeography, biota, herpetology, reptiles, Fewer tags LEAN-Corrected Collier County DEM for wetlands Lidar-derived digital elevation models often contain a vertical bias due to vegetation. In areas with tidal influence the amount of bias can be ecologically significant, for example, by decreasing the expected inundation frequency. We generated a corrected digital elevation model (DEM) for wetlands throughout Collier county using a modification of the Lidar Elevation Adjustment with NDVI (LEAN) technique (Buffington et al. 2016). GPS survey data (15,223 points), NAIP-derived Normalized Difference Vegetation Index (2010), a 10 m lidar DEM from 2007, and a 10 m canopy surface model were used to generate a model of predicted bias across marsh, mangrove, and cypress habitats. The predicted bias was then subtracted from... Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, Raster; Tags: Collier county, Remote Sensing, USGS Science Data Catalog (SDC), biota, cypress, All tags... digital elevation models, estuary, lidar, mangroves, marsh, wetlands, Fewer tags Geochemical Characteristics of the Conterminous United States: % MgO This raster depicts the percentage of lithological magnesium oxide (MgO) content in surface or near surface geology. We derived these rasters by calculating the average percent MgO content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, Magnesium, All tags... MgO, Fewer tags Geochemical Characteristics of the Conterminous United States: % Al2O3 This raster depicts the percentage of lithological aluminum oxide (Al2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Al2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Al2O3, Aluminium, Bedrock, Conterminous U.S., Geochemistry, All tags... Geology, Fewer tags Coastal Cactus Wren Habitat Suitability Model for Southern California (2015) This habitat model was developed to delineate suitable habitat for coastal cactus wren (Campylorhynchus brunneicapillus) in southern California. A primary purpose of the model is to identify potential restoration sites that may not currently support cactus patches required by wrens, but which are otherwise highly suitable. These are areas that could be planted with cactus to increase wren populations, an important management objective for many land managers. We used the Partitioned Mahalanobis D2 modeling technique to construct alternative models with different combinations of environmental variables. Variables were calculated at each point in the center of a 150 m x 150 m cell in a grid of points across the landscape.... Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, Raster; Tags: California, Campylorhynchus brunneicapillus, Los Angeles County, Orange County, Partitioned Mahalanobis D2, All tags... Riverside County, San Bernardino County, San Diego County, USGS Science Data Catalog (SDC), Ventura County, biota, coastal cactus wren, environment, geospatial analysis, habitats, landscape modeling, life sciences, multivariate statistical analysis, native species, niche modeling, shrubland ecosystems, species distribution models, statistical analysis, wildlife, Fewer tags Flood inundation map geospatial datasets for Lake Ontario, New York This dataset has been archived; it has been superseded by version 2.0 (November 2021) which can be found at https://doi.org/10.5066/P95PT2RV. Static flood inundation boundary extents were created along the entire shoreline of Lake Ontario in Cayuga, Jefferson, Monroe, Niagara, Orleans, Oswego, and Wayne Counties in New York by using recently acquired (2007, 2010, 2014, and 2017) light detection and ranging (lidar) data. The flood inundation maps, accessible through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and water depth of shoreline flooding in 8 segments corresponding... Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service, Raster; Tags: Cayuga County, New York, Flood mapping, Geospatial Applications, Geospatial Applications, Hydrology, All tags... Information Visualization, Jefferson County, New York, Lake Ontario, Monroe County, New York, New York, Niagara County, New York, Orleans County, New York, Oswego County, New York, USGS Science Data Catalog (SDC), Wayne County, New York, decision support, flood inundation, flood-inundation maps, Fewer tags Geochemical Characteristics of the Conterminous United States: % Nitrogen This raster depicts the percentage of lithological nitrogen (N) content in surface or near surface geology. We derived these rasters by calculating the average percent N content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from Soller et... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, nitrogen Geochemical Characteristics of the Conterminous United States: % Sulfur This raster depicts the percentage of lithological sulfur (S) content in surface or near surface geology. We derived these rasters by calculating the average percent S content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from Soller et al.... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, sulfur Maximum horizontal stress orientation and relative stress magnitude (faulting regime) data throughout North America (COPY) This Data Release accompanies the publication "State of stress in areas of active unconventional oil and gas development in North America" by J.-E. Lund Snee (now J.-E. Lundstern) and M.D. Zoback (2022) in the AAPG Bulletin. This dataset provides maximum horizontal stress (SHmax) orientation and relative stress magnitude (faulting regime) information that comprise a new-generation crustal stress map for North America. Relative stress magnitudes are presented using the Aϕ (A_phi) parameter, a single scalar that represents the ratio of the three principal stress magnitudes. Data were collected between 2015 and 2022. Data points for SHmax orientations, relative stress magnitudes, and the earthquake focal mechanisms... Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, OGC WFS Layer, OGC WMS Layer, Raster, Shapefile; Tags: Canada, Caribbean Islands, Caribbean Sea, Holocene, NCCWSC, All tags... North America, Quaternary, SHmax, USGS:6469516bd34e3a6027e2f527, United States, earthquakes, engineering geology, geoscientificInformation, hazards, horizontal stress, induced seismicity, maps and atlases, stress, tectonic processes, Fewer tags Geochemical Characteristics of the Conterminous United States: % P2O5 This raster depicts the percentage of lithological phosphorus pentoxide (P2O5) content in surface or near surface geology. We derived these rasters by calculating the average percent P2O5 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, P2O5, All tags... Phosphorus, Fewer tags Geochemical Characteristics of the Conterminous United States: % SiO2 This raster depicts the percentage of lithological silicon dioxide (SiO2) content in surface or near surface geology. We derived these rasters by calculating the average percent SiO2 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, SiO2, All tags... Silica, Fewer tags Flood inundation map geospatial datasets for Lake Ontario, New York (ver. 2.0, November 2021) Static flood inundation boundary extents were created along the entire shoreline of Lake Ontario in Cayuga, Jefferson, Monroe, Niagara, Orleans, Oswego, and Wayne Counties in New York by using recently acquired (2007, 2010, 2014, and 2017) light detection and ranging (lidar) data. The flood inundation maps, accessible through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and water depth of shoreline flooding in 8 segments corresponding to adjacent water-surface elevations (stages) at the following 8 USGS lake gages on Lake Ontario: A – Lake Ontario (Thirtymile point) at Golden... Categories: Data, Data Release - Revised; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, GeoTIFF, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service, Raster; Tags: Cayuga County, New York, Flood mapping, Geospatial Applications, Geospatial Applications, Hydrology, All tags... Information Visualization, Jefferson County, New York, Lake Ontario, Monroe County, New York, New York, Niagara County, New York, Orleans County, New York, Oswego County, New York, USGS Science Data Catalog (SDC), Wayne County, New York, decision support, flood inundation, flood-inundation maps, Fewer tags Geochemical Characteristics of the Conterminous United States: % Na2O This raster depicts the percentage of lithological sodium oxide (Na2O) content in surface or near surface geology. We derived these rasters by calculating the average percent Na2O content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, Na2O, All tags... Sodium, Fewer tags Geochemical Characteristics of the Conterminous United States: % CaO This raster depicts the percentage of lithological calcium oxide (CaO) content in surface or near surface geology. We derived these rasters by calculating the average percent CaO content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, CaO, Calcium, Conterminous U.S., Geochemistry, All tags... Geology, Fewer tags Geochemical Characteristics of the Conterminous United States: % Fe2O3 This raster depicts the percentage of lithological ferric oxide (Fe2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Fe2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Fe2O3, Geochemistry, Geology, All tags... Iron, Fewer tags Geochemical Characteristics of the Conterminous United States: % K2O This raster depicts the percentage of lithological potassium oxide (K2O) content in surface or near surface geology. We derived these rasters by calculating the average percent K2O content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from... Categories: Data, Map; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, GeoTIFF, Map Service; Tags: Bedrock, Conterminous U.S., Geochemistry, Geology, K2O, All tags... Potassium, Fewer tags