Folders: ROOT > ScienceBase Catalog > Pacific Coastal and Marine Science Center ( Show all descendants )
204 results (12ms)
Location
Folder
ROOT _ScienceBase Catalog __Pacific Coastal and Marine Science Center
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
An unmanned aerial system (UAS) was used to acquire high-resolution imagery of the intertidal zone at West Whidbey Island, Washington on June 4, 2019. This imagery was processed using structure-from-motion (SfM) photogrammetric techniques to derive a high-resolution digital surface model (DSM), orthomosaic imagery, and topographic point clouds. In order to maximize the extent of the subaerially exposed area, the survey was timed to coincide with a spring low tide occurring at approximately 18:02 Universal Coordinated Time (UTC) (11:02 Pacific Daylight Time (PDT)), with a predicted water level of -0.74 meters below mean lower-low water (MLLW) at the Sunset Beach NOAA subordinate tide station (station ID 9447951)....
Tags: Geomorphology,
Remote Sensing
This data release supersedes version 1, published in 2017 under https://doi.org/10.5066/F74M93HF. Please see Version_History_P9HG8UDS.txt below for more information. The San Clemente Dam, built in the 1920s on the Carmel River in Monterey County, California, was removed during 2014 and 2015. The dam-removal project was the largest in California to date, and one of the largest in the U.S. This USGS data release presents data collected before, during, and after the removal of the dam. The data were collected to study how the river channel's topographic profiles and sediment distributions changed in response to new sediment supply after dam removal and base-level changes in the former San Clemente reservoir sediment...
To further extend the scope of the Science Application for Risk Reduction (SAFRR) project, detailed hydrodynamic simulations were run at three harbor locations in California. For the locations of 1) Oakland/Alameda, 2) Half Moon Bay, and 3) Santa Cruz, simulations at approximately 5-m resolution were performed using the high-order Boussinesq-type model COULWAVE. The Oakland/Richmond simulation area focuses on the major port facilities in the area and the Half Moon Bay and Santa Cruz simulations focus on Pillar Point Harbor and Santa Cruz Harbor, respectively.
Tags: Geography,
Marine Geology
Note: This data release has been superseded, available here: https://doi.org/10.5066/P9MYL7WJ This data release contains processed high-resolution multichannel sparker seismic-reflection (MCS) data that were collected aboard Humboldt State University’s R/V Coral Sea in October of 2018 on U.S. Geological Survey cruise 2018-658-FA on the shelf and slope between Cape Blanco, Oregon, and Cape Mendocino, California. MCS data were collected to characterize quaternary deformation and sediment dynamics along the southern Cascadia margin.
This dataset consists of physics-based Delft3D model and Delwaq model input files used in modeling sediment deposition and concentrations around the coral reefs of west Maui, Hawaii. The Delft3D models were used to simulate waves and currents under small (SC1) and large (‘SC2’) wave conditions for current stream discharge (‘Alt1’) and stream discharge with watershed restoration (‘Alt3’). Delft3D model results were subsequently used as forcing conditions for Delwaq models to simulate sediment transport and dispersion. The Delwaq models were used to simulate sediment transport and concentrations under the same two wave and stream discharge scenarios. The Delwaq models were run using forcing conditions generated by...
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
Environmental Health,
Geography,
Geomorphology,
RBRduo pressure and temperature sensors, mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Skagit and Bellingham Bays, Washington, USA, from December 2017 to February 2018, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: CMGP,
Coastal and Marine Geology Program,
Marine Geology,
Oceans,
PCMSC,
This data release presents measurements and data from two vibracores (JRBP2018-VC01A and JRBP2018-VC01B) collected from Searsville Lake, a reservoir in Jasper Ridge Biological Preserve, Stanford, California, on October 29, 2018 (USGS Field Activity 2018-682-FA).
This data release presents beach topography and nearshore bathymetry data from repeated surveys in northern Monterey Bay, California to document changes in shoreline position and coastal morphology as they relate to episodic (storms), seasonal, and interannual and longer (e.g. El Niño) processes. The ongoing monitoring program was initiated in October 2014 with semi-annual surveys performed in late summer (September or October) and Spring (March). Nearshore bathymetry and topography data were collected along a series of shore-perpendicular transects spaced primarily at 50-250 m intervals between Santa Cruz and Moss Landing, California (fig. 1). The transects were located along sandy stretches of the coastline...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bathymetry and Elevation,
CMGP,
Coastal and Marine Geology Program,
Echo Sounders,
GPS (Global Positioning System),
Multichannel minisparker and boomer seismic-reflection and chirp sub bottom data were collected by the U.S. Geological Survey in September of 2013 in Port Valdez, Alaska. Data were collected aboard the USGS R/V Alaskan Gyre during field activity G-01-13-GA. Sub-bottom acoustic penetration spans several hundreds of meters and is variable by location. High-resolution multichannel seismic-reflection data were acquired to support the U.S. Geological Survey Alaska coastal and marine hazards project to explore the sedimentary structure of tsunamigenic landslide deposits around an IODP drill site in Port Valdez. These data and information are intended for science researchers, students from elementary through college, policy...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geophysics,
Seismology,
Structural Geology
![]() High-resolution single-channel Chirp and minisparker seismic-reflection data were collected by the U.S. Geological Survey in September and October 2006, offshore Bolinas to San Francisco, California. Data were collected aboard the R/V Lakota, during field activity L-1-06-SF. Chirp data were collected using an EdgeTech 512 chirp subbottom system and were recorded with a Triton SB-Logger. Minisparker data were collected using a SIG 2-mille minisparker sound source combined with a single-channel streamer, and both were recorded with a Triton SB-Logger.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Bathymetry and Elevation,
Bolinas,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Elevation,
Geochemical analyses of authigenic carbonates, bivalves, and pore fluids were performed on samples collected from seep fields along the Queen Charlotte Fault, a right lateral transform boundary that separates the Pacific and North American tectonic plates. Samples were collected using grab samplers and piston cores, and were collected during three different research cruises in 2011, 2015, and 2017.
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
Haida Gwaii,
PCMSC,
Pacific Coastal and Marine Science Center,
We characterized seafloor sediment conditions near the mouth of the Elwha River from underwater photographs taken every four hours from September 2011 to December 2013. A digital camera was affixed to a tripod that was deployed in approximately 10 meters of water (Tripod location from September 2011 to April 2013: 48.15333, -123.55931; tripod location from April 2013 to December 2013: 48.15407, -123.55444). Each photograph was qualitatively characterized as one of six categories: (1) base, or no sediment; (2) low sediment; (3) medium sediment; (4) high sediment; (5) turbid; or (6) kelp. For base conditions, no sediment was present on the seafloor. Low sediment conditions were characterized by a light dusting of...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Clallam County,
Elwha River,
Olympic Peninsula,
Remote Sensing,
State of Washington,
High-resolution acoustic backscatter data, bathymetry data, single channel minisparker seismic-reflection data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island and southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder, a 500 Joule SIG 2-mille minisparker sound source and a single channel streamer.
This data release includes the results of analysis of video data conducted by Oregon State University and the geo-habitat interpretation of multibeam echo sounder (MBES) data conducted by the USGS. The data were collected in 2014 and were published in Cochrane and others (2015). This data release accompanies report that describes the project and results in detail (Cochrane and others, 2017). All the data are provided as geographic information system (GIS) files that contain both Esri ArcGIS geotiffs or shapefiles. For those who do not own the full suite of Esri GIS and mapping software, the data can be read using Esri ArcReader, a free viewer that is available at http://www.esri.com/software/arcgis/arcreader/index.html...
Categories: Data;
Tags: Marine Geology
This data release includes approximately 1,032 km of marine single-channel seismic-reflection data collected by the U.S. Geological Survey on a research cruise (USGS survey 2014-632-FA) in July and August, 2014, between Point Sal and Refugio State Beach. The dataset includes 168 profiles, most of which were collected on tracklines roughly perpendicular to the coast at 1 km line spacing; additional profiles were collected on coast-parallel tie lines. These data were acquired to support the California Seafloor Mapping Program and USGS Geologic Hazards projects. Seismic-reflection data were collected using a minisparker system that creates an acoustic signal by discharging an electrical pulse between electrodes and...
The U.S. Geological Survey (USGS) collected high-resolution multichannel sparker, minisparker and chirp seismic-reflection data in November 2014, from offshore Catalina and Santa Cruz basins. The survey was designed to image faults and folds associated with movement on the faults in offshore southern California, including the Catalina, Catalina Ridge, San Clemente, and San Diego Trough faults. Data were collected aboard the Scripps Institution of Oceanography R/V Robert Gordon Sproul. Subbottom acoustic penetration spans several hundred meters and is variable by location. This data release contains processed digital SEG-Y. The seismic-reflection profiles of bedrock, sediment deposits and tectonic structure provide...
An unmanned aerial system (UAS) was used to acquire high-resolution imagery of the intertidal zone at Puget Creek and Dickman Mill Park in Tacoma, Washington on June 3, 2019. This imagery was processed using structure-from-motion (SfM) photogrammetric techniques to derive high-resolution digital surface models (DSM), orthomosaic imagery, and topographic point clouds. In order to maximize the extent of the subaerially exposed area, the survey was timed to coincide with a spring low tide occurring at approximately 18:36 Universal Coordinated Time (UTC) (11:36 Pacific Daylight Time (PDT)), with an observed water level of -1.47 meters relative to the NAVD88 vertical datum at the Tacoma NOAA tide station (station ID...
Tags: Geomorphology,
Remote Sensing
High-resolution multichannel minisparker and chirp seismic-reflection data were collected in August of 2015 to explore marine geologic hazards of inland waterways of southeastern Alaska. Sub-bottom profiles were acquired in the inland waters between Glacier Bay and Juneau, including Cross Sound and Chatham Strait. High-resolution seismic-reflection profiles were acquired to assess evidence for active seabed faulting and submarine landslide hazards. The data were collected aboard the U.S. Geological Survey R/V Alaskan Gyre. Chirp data were acquired using a tow-fish Edgetech 512 chirp subbottom profiler, and multichannel (mcs) minisparker data were acquired using a 500-Joule minisparker source and a 48-channel Geometrics...
Categories: Data;
Tags: Geophysics
First release: 2015 Revised: July 2017 (ver. 2.0) Approximately 95 square kilometers of area was mapped with multibeam sonar. The survey expanded the extent of mapping data collected by Solmar Hydro Inc. in 2013 under a contract with WindFloat Pacific. When added to the Solmar Hydro data the total area mapped is approximately 140 square kilometers, lying in Federal waters on the shelf offshore of Coos Bay of interest for renewable energy (OCS-P lease blocks 6523, 6524, 6573, 6574, 6623, 6624, 6673, and 6674). Water depths range from 300 to 500 meters and are within the effective depth range of the Reson 7111. The seabed in his area is composed of sand and mud, with rocky outcrops on tectonically uplifted features....
An unoccupied aerial system (UAS) was used to acquire high-resolution imagery of the exposed reservoir delta at Los Padres Reservoir, in the Carmel River valley in central California on 1 November 2017. This survey followed sediment delivery to the reservoir by the Carmel River due to landscape response after the 2016 Soberanes Fire and high flows in winter 2017. The imagery from this survey was processed using structure-from-motion (SfM) photogrammetric techniques to derive a high-resolution digital surface model (DSM), a digital elevation model (DEM), an orthomosaic image, and a topographic point cloud. A total of six flights were conducted for the survey between 19:35 and 22:15 UTC (12:35 and 15:15 PDT). Only...
|
![]() |