Filters: Tags: Gorda (X)
14 results (193ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes |
This part of DS 781 presents data for the isopachs of the Point Sur to Point Arguello, California, region. The vector data file is included in the “Isopachs_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
These data are from a 3-month long deployment of nodal seismometers that ran from December 22th, 2022 until March 1st, 2023 as part of a Distributed Acoustic Sensing (DAS) experiment above the Gorda plate. The deployment was done in response to the 2022/12/20 M6.4 Ferndale earthquake. The sensors were deployed at 46 locations along Old Arcata Rd between Arcata and Eureka California (Figure 1); these locations track the approximate location of the fiber optic cable used as part of the DAS experiment. The instruments have a battery recording life of approximately one month and were swapped out in the same locations in Mid-to-late January, and late February-Early march. Exceptions are that only 29 were deployed for...
This part of DS 781 presents data for the transgressive contours of the Point Sur to Point Arguello, California, region. The vector data file is included in the “TransgressiveContours_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Water depths determined from bathymetry data were added to the sediment thickness...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
This part of DS 781 presents data for the faults of the Point Sur to Point Arguello, California, region. The vector data file is included in the “Faults_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. Faults in the Point Sur to Point Arguello region are identified on seismic-reflection data based on abrupt truncation or warping of reflections and (or) juxtaposition of reflection panels with different seismic parameters such as reflection presence, amplitude, frequency, geometry, continuity, and vertical sequence. Faults were primarily mapped by interpretation of seismic reflection profile data collected by the U.S. Geological Survey between 2008 and 2014.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
These data are from a 2-month long Distributed Acoustic Sensing (DAS) Experiment in Arcata, CA, that was conducted jointly by the U.S. Geological Survey, Cal Poly Humboldt University, and OptaSense Inc. An OptaSense QuantX DAS interrogator was installed in the Arcata Police Station and connected to a fiber owned by Vero Communications that runs from Arcata to Eureka
Categories: Data;
Tags: Arcata California,
Distributed Acoustic Sensing,
Earthquakes,
Eureka California,
Geophysics,
This part of DS 781 presents data for the folds of the Point Sur to Point Arguello, California, region. The vector data file is included in the “Folds_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. Folds in the Point Sur to Point Arguello region are identified on seismic-reflection data based on warping and tilting of reflections. Folds were primarily mapped by interpretation of seismic reflection profile data collected by the U.S. Geological Survey between 2008 and 2014 and interpretation of high-resolution bathymetry data.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
These data are from a 3-month long deployment of nodal seismometers that ran from December 22th, 2022 until March 1st, 2023 as part of a Distributed Acoustic Sensing (DAS) experiment above the Gorda plate. The deployment was done in response to the 2022/12/20 M6.4 Ferndale earthquake. The sensors were deployed at 46 locations along Old Arcata Rd between Arcata and Eureka California (Figure 1); these locations track the approximate location of the fiber optic cable used as part of the DAS experiment. The instruments have a battery recording life of approximately one month and were swapped out in the same locations in Mid-to-late January, and late February-Early march. Exceptions are that only 29 were deployed for...
This part of DS 781 presents data for the depth-to-transition map of the Point Sur to Point Arguello, California, region. The raster data file is included in the “DepthToTransition_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Water depths determined from bathymetry data were added to the sediment thickness...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
This part of DS 781 presents data for the sediment-thickness map of the Point Sur to Point Arguello, California, region. The raster data file is included in the “SedimentThickness_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W.,...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
These data are from a 3-month long deployment of nodal seismometers that ran from December 22th, 2022 until March 1st, 2023 as part of a Distributed Acoustic Sensing (DAS) experiment above the Gorda plate. The deployment was done in response to the 2022/12/20 M6.4 Ferndale earthquake. The sensors were deployed at 46 locations along Old Arcata Rd between Arcata and Eureka California (Figure 1); these locations track the approximate location of the fiber optic cable used as part of the DAS experiment. The instruments have a battery recording life of approximately one month and were swapped out in the same locations in Mid-to-late January, and late February-Early march. Exceptions are that only 29 were deployed for...
USGS Historical Quadrangle in GeoPDF.
USGS Historical Quadrangle in GeoPDF.
As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Water depths determined from bathymetry data were added to the sediment thickness data to provide information on the depth to base of the post-LGM unit. Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W., 2012, Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters...
These data are from a 3-month long deployment of nodal seismometers that ran from December 22th, 2022 until March 1st, 2023 as part of a Distributed Acoustic Sensing (DAS) experiment above the Gorda plate. The deployment was done in response to the 2022/12/20 M6.4 Ferndale earthquake. The sensors were deployed at 46 locations along Old Arcata Rd between Arcata and Eureka California (Figure 1); these locations track the approximate location of the fiber optic cable used as part of the DAS experiment. The instruments have a battery recording life of approximately one month and were swapped out in the same locations in Mid-to-late January, and late February-Early march. Exceptions are that only 29 were deployed for...
|
|
