Skip to main content
Advanced Search

Filters: Tags: Minnelusa Formation (X)

11 results (6ms)   

View Results as: JSON ATOM CSV
thumbnail
Under the direction and funding of the National Cooperative Geologic Mapping Program (NCGMP) with guidance and encouragement from the United States Geological Survey (USGS), there has been a decadal strategic plan in place to call for geologic mapping across the nation. This call has been increasing the need for digital data that has not yet been made available. With such a demand, physical data is being re-released as vector-based, GIS operable data, which is viable as a corporate asset to the USGS. This collection of reports is part of the compilation and synthesis efforts hampered by the distributed nature of subsurface investigations at the USGS and a general lack of cataloging and archiving of 3-D geological...
Categories: Data; Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Almond Formation, Arizona, Baxter Shale, Castlegate Sandstone, Colorado, All tags...
thumbnail
This digital data release presents multiple previously published elements of the structural configuration of the Black Hills regional subsurface. The original data within this geodatabase is sourced from multiple U.S. Geological Survey Open File Reports into the hydrology of the Black Hills, stored on the USGS Water Mission Area NSDI Node (Driscoll, 1992; Strobel et al., 1999; Williamson et al., 2000). Data include mapped surface exposures of faults and fold hinges, the location and depth of 1025 formation tops of the Madison Group, Minnelusa Formation, and Minnekahta Formation from water well scout tickets, isopach contours of the Madison Group and Minnelusa Formation, and structure contour maps of the top of the...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This data set describes areas where the Minnelusa Formation is directly overlain by surficial deposits, as well as those areas where the Minnelusa Formation is absent in the Black Hills area, South Dakota.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This data set is a polygon coverage created in ARC/INFO that represents the generalized thickness of the Minnelusa Formation, Black Hills, South Dakota. The thickness of the Minnelusa Formation was determined by substracting the elevation of the top of the Madison Limestone from the elevation of the top of the Minnelusa Formation. The elevations for the tops of the formations were determined from geologic logs for wells drilled as...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This data set represents geologic structure contours for the Minnelusa Formation, Black Hills, South Dakota.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This dataset describes wells and test holes completed in the Minnelusa Formation that were used to create the structure-contours for the top of the Minnelusa Formation, Black Hills, South Dakota.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This data set represents potentiometric surface contours for the Minnelusa aquifer, Black Hills, South Dakota.
Core Research Center, cutting CZ04078, from well operated by SINCLAIR OIL & GASRaw Properties from download, web scrape, MapServer, and Macrostrat API{"Lib Num": "CZ04078", "API Num": null, "Operator": "SINCLAIR OIL & GAS", "Well Name": "MINNELUSA SECTION", "Field": null, "State": "WY", "County": "CROOK", "Thin Sec": "F", "Analysis": "F", "Latitude": "44.49618", "Longitude": "-104.12382", "coordinates_geohash": "9xvvns7351hk", "Source": "CENTER OF SECTION", "Min": "1", "Max": "12", "Security Flag": null, "crc_collection_name": "cutting", "sb_parent_id": "4f4e49d8e4b07f02db5df2d2", "intervals": [{"Formation": null, "Age": null, "Min Depth": null, "Max Depth": null}], "crcwc_url": "https://my.usgs.gov/crcwc/cutting/report/18079",...
thumbnail
This digital data release presents subsurface data from multiple geologic units that were part of a previous study of the regional subsurface structural configuration of the Powder River Basin in Wyoming and Montana. The original data within this geodatabase is sourced from an unpublished doctoral dissertation by Jessie Melick at Montana State University (Melick, 2013). Data contained in this release were generated from elevation grids developed by Jessie Melick using 28,000 wells and geophysical well logs penetrating Paleozoic to Mesozoic strata over a 70,000 square-kilometer area designated by the Department of Energy as a realistic locality for geologic carbon sequestration (Melick, 2013). Information included...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This data set is a polygon coverage created in ARC/INFO that represents the depth to the top of the Minnelusa Formation below the land surface, Black Hills, South Dakota.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This dataset describes wells completed in the Minnelusa Formation that were used to create a potentiometric surface for the Minnellusa aquifer.


    map background search result map search result map Core Research Center Cutting CZ04078 Potentiometric surface contours for the Minnelusa aquifer, Black Hills area, South Dakota Wells used in the creation of potentiometric surface contours for the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood Aquifers in the Black Hills Area, South Dakota Geologic structure-contours for the top of the Minnelusa Formation in the Black Hills Area, South Dakota Overlying surficial deposits and absent areas for the Minnelusa Formation in the Black Hills area, South Dakota Selected wells and test holes used in structure-contour maps of the Inyan Kara Group, Minnekahta Limestone, Minnelusa Formation, Madison Limestone, and Deadwood Formation in the Black Hills Area, South Dakota Depth to top of the Minnelusa Formation Generalized thickness of the Minnelusa Formation, Black Hills, South Dakota. Digital subsurface database of previously published well tops, structural features, and contour maps of the Inyan Kara Group, Minnekahta Formation, Minnelusa Formation, Madison Group, and Deadwood Formation, Black Hills region, South Dakota and Wyoming Collection of digital structure contour maps from previously published USGS studies Digital subsurface database of elevation point data and structure contour maps of multiple subsurface units, Powder River Basin, Wyoming and Montana, USA Overlying surficial deposits and absent areas for the Minnelusa Formation in the Black Hills area, South Dakota Wells used in the creation of potentiometric surface contours for the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood Aquifers in the Black Hills Area, South Dakota Potentiometric surface contours for the Minnelusa aquifer, Black Hills area, South Dakota Selected wells and test holes used in structure-contour maps of the Inyan Kara Group, Minnekahta Limestone, Minnelusa Formation, Madison Limestone, and Deadwood Formation in the Black Hills Area, South Dakota Geologic structure-contours for the top of the Minnelusa Formation in the Black Hills Area, South Dakota Depth to top of the Minnelusa Formation Generalized thickness of the Minnelusa Formation, Black Hills, South Dakota. Digital subsurface database of previously published well tops, structural features, and contour maps of the Inyan Kara Group, Minnekahta Formation, Minnelusa Formation, Madison Group, and Deadwood Formation, Black Hills region, South Dakota and Wyoming Digital subsurface database of elevation point data and structure contour maps of multiple subsurface units, Powder River Basin, Wyoming and Montana, USA Collection of digital structure contour maps from previously published USGS studies