Filters: Tags: imaging spectroscopy (X)
31 results (29ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
Reflectance data from HyMap™ were processed using the Material Identification and Characterization Algorithm (MICA), a module of the USGS PRISM (Processing Routines in IDL for Spectroscopic Measurements) software (Kokaly, 2011), programmed in Interactive Data Language (IDL; Harris Geospatial Solutions, Broomfield, Colorado). The HyMap reflectance data are provided and described in this data release. MICA identifies the spectrally predominant mineral(s) in each pixel of imaging spectrometer data by comparing continuum-removed spectral features in the pixel’s reflectance spectrum to continuum-removed absorption features in reference spectra of minerals, vegetation, water, and other materials. Linear continuum removal...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Alaska,
Alaska,
Alaska Range,
Bond Creek,
Canada,
Approximately 1,900 line square kilometers of imagery were collected using a HyMap™ sensor (Cocks and others, 1998) mounted on a modified Piper Navajo aircraft. The aircraft was flown at an altitude of approximately 5,050 m (3,480 m above the mean ground surface elevation of 1570 m) resulting in average ground spatial resolution of 6.7 m. Solar elevation and azimuth angles ranged from 42.0-48.3° (average 46.2°) and 134.2-182.4° (average 155°), respectively. HyMap measured reflected sunlight in 126 narrow channels that cover the wavelength region of 455 to 2,483 nm. Data were delivered by the operators of the sensor (HyVista Corp., Australia) in units of radiance (data are available in Kokaly and others, 2017)....
We used field studies and imaging spectroscopy to investigate the effect of grazing on vegetation cover in historically grazed and ungrazed high-mesa rangelands of the Grand Staircase?Escalante National Monument, Utah, USA. Airborne hyperspectral remote sensing data coupled with spectral mixture analysis uncovered subtle variations in the key biogeophysical properties of these rangelands: the fractional surface cover of photosynthetic vegetation (PV), nonphotosynthetic vegetation (NPV), and bare soil. The results show that a high-mesa area with long-term grazing management had significantly higher PV (26.3%), lower NPV (54.5%), and lower bare soil (17.2%) cover fractions in comparison to historically ungrazed high-mesa...
Categories: Publication;
Types: Citation,
Journal Citation;
Tags: Ecosystems,
Springer New York,
grazing,
hyperspectral remote sensing,
imaging spectroscopy,
Mineral predominance data were a derivative product from the Corescan© reflectance data. Corescan Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a...
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
A map of the wavelength position of the white mica 2,200 nanometer (nm) Al-OH absorption feature was compiled for a region of Nabesna, Alaska, using HyMap™ reflectance data provided and described in this data release. White mica wavelength position was computed for each pixel with spectrally predominant muscovite or illite. The computation was made using a function of the USGS PRISM (Processing Routines in IDL for Spectroscopic Measurements) software (Kokaly, 2011), programmed in Interactive Data Language (IDL; Harris Geospatial Solutions, Broomfield, Colorado). The PRISM function applies linear continuum-removal (Clark and Roush, 1984) to the 2,200 nm feature and fits a parabola to three channels: the channel...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Alaska,
Alaska,
Alaska Range,
Bond Creek,
Canada,
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
Approximately 1,900 square kilometers of imagery were collected from July 14 to July 21, 2014 using a HyMap™ sensor (Cocks and others, 1998) mounted on a modified Piper Navajo aircraft. The survey area covered parts of the Wrangell and Nutzotin Mountains in the eastern Alaska Range near Nabesna, Alaska. The aircraft was flown at an altitude of approximately 5,050 meters (m) (3,480 m above the mean ground surface elevation of 1570 m) resulting in average ground spatial resolution of 6.7 m. HyMap measured reflected sunlight in 126 narrow channels that cover the wavelength region of 455 to 2,483 nanometers (nm). Data were delivered by the operators of the sensor (HyVista Corp., Australia) in units of radiance (Kokaly...
Categories: Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alaska,
Alaska,
Alaska Range,
Bond Creek,
Canada,
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Alaska,
Alaska,
Alaska Range,
Bond Creek,
Canada,
SPECPRsplib07 This compressed archive includes: Files, in SPECPR format, containing spectral data and associated metadata descriptions: measured spectra (splib07a) spectra interpolated to a higher number of more finely-spaced channels (splib07b) spectra convolved to other spectrometers, for example Analytical Spectral Devices standard resolution (s07_ASD) AVIRIS-Classic 2014 characteristics (s07_AV14) Hyperspectral Mapper (HyMap) 2014 characteristics (s07_HY14) and others spectra resampled to multispectral sensors: ASTER Landsat 8 OLI Sentinel-2 MSI Worldview-3 Folders containing information linked to from the metadata descriptions in the SPECPR files: README: contains a HTML version of the USGS Data...
ASCIIdata Files containing spectral data in ASCII text format: measured spectra (ASCIIdata_splib07a.zip), including wavelength positions and bandpass (Full-Width at Half-Maximum; FWHM) values of channels in the spectrometers utilized spectra interpolated to a higher number of more finely-spaced channels (ASCIIdata_splib07b.zip) spectra convolved to other spectrometers, including the wavelength positions and bandpass (FWHM) values of the channels in the spectrometers, for example Analytical Spectral Devices standard resolution (ASCIIdata_splib07b_cvASD.zip) AVIRIS-Classic 2014 characteristics (ASCIIdata_splib07b_cvAVIRISc2014.zip) Hyperspectral Mapper 2014 characteristics (ASCIIdata_splib07b_cvHYMAP2014.zip) and...
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
GIFplots Files containing GIF images of spectral plots: GIFplots_splib07a.zip contains plots of measured spectra, including plots showing the full wavelength range of the measured spectra, organized in chapter sub-folders as described previously for the ASCII data. plots showing specific portions of the electromagnetic spectrum are organized folders within the “plots_by_wavelength_region” folder, including: range1_uv_to_visible (0.2 - 1.0 microns) range2_visible_to_swir (0.2 - 2.5 microns) range3_swir (1.5 - 5.5 microns) range4_swir_to_mir (2.5 - 25 microns) range5_swir_to_fir_wavenumber (4,000 - 50 cm-1 which spans 2.5 - 200 microns) plots of spectra interpolated to a higher number of more finely-spaced...
Measurements of reference materials were made on the Corescan© HCI-III to evaluate the supplied channel wavelength positions and bandpass values. Wavelength position and bandpass of channels in a spectrometer, referred to as full-width half max (FWHM) in the contractor's documentation (Corescan_Product_MetaData_v3.pdf), are two fundamental spectral characteristics that need to be known in order to spectrally identify minerals by comparison to a spectral library, like the Material Identification and Characterization Algorithm (MICA) analysis used to generate the mineral predominance maps. Spectrometers with finer bandpass can reveal greater spectral detail that can be related to a material’s chemical composition...
This dataset is a collection of hyperspectral imagery profiles of 13 common algae associated with Harmful Algae Blooms (HAB). Data were retrieved from a hyperspectral microscope at, and with the cooperation of, the National Institute of Standards and Technology. Samples were collected from USGS water quality sampling efforts, and were also purchased from commercial vendors of biological materials. Data are shown in basic hyperspectral imagery form, transformed into the first derivative and corrected with a flat field algorithm to account for variations in locale lighting conditions. First posted - January 6, 2020 (available from author) Revised - October 30, 2020 (version 2.0)
Categories: Data,
Data Release - Revised;
Tags: Aquatic Biology,
Botany,
Geography,
Harmful Algal Blooms,
Remote Sensing,
HTMLmetadata Text files in HTML-format containing metadata about samples and spectra. Also included in the zip file are folders containing information linked to from the HTML files, including: README: contains a HTML version of the USGS Data Series publication, linked to this data release, that describes this spectral library (Kokaly and others, 2017). The folder also contains an HTML version of the release notes. photo_images: contains full resolution images of photos of samples and field sites. photo_thumbs: contains low-resolution thumbnail versions of photos of samples and field sites. GENERAL LIBRARY DESCRIPTION This data release provides the U.S. Geological Survey (USGS) Spectral Library Version 7 and...
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
This data release provides the U.S. Geological Survey (USGS) Spectral Library Version 7 and all related documents. The library contains spectra measured with laboratory, field, and airborne spectrometers. The instruments used cover wavelengths from the ultraviolet to the far infrared (0.2 to 200 microns). Laboratory samples of specific minerals, plants, chemical compounds, and man-made materials were measured. In many cases, samples were purified, so that unique spectral features of a material can be related to its chemical structure. These spectro-chemical links are important for interpreting remotely sensed data collected in the field or from an aircraft or spacecraft. This library also contains physically-constructed...
|
|
