Filters: Tags: source rock (X)
5 results (10ms)|
Filters
Date Range
Contacts
Categories Tag Types Tag Schemes |
In 2020, the U.S. Geological Survey (USGS) assessed the potential for undiscovered, technically recoverable continuous (unconventional) oil and gas resources in the Mowry Shale in the Wind River Basin Province (Finn and others, 2021). To better characterize the source rock potential of the Mowry Shale and associated strata, 129 samples were collected from 45 wells from the well cuttings collection stored at the USGS Core Research Center in Lakewood, Colorado. The sampled wells are located along the margins of the basin in order to obtain samples that were not subjected to the effects of deep burial and subsequent organic carbon loss due to thermal maturation (Daly and Edman, 1987) (fig. 1). One hundred samples are...
Categories: Data;
Tags: Energy Resources,
Mowry Shale,
Thermopolis Shale,
USGS Science Data Catalog (SDC),
Wind River,
In 2006, Rock Well Petroleum drilled and logged nearly 1,600 feet (ft) of continuous core on the southern part of the Casper arch in Natrona County, Wyoming (see fig1.png). The core hole, named the Poison Spider core #8 penetrated the interval extending from the Upper Cretaceous Frontier Formation to the Triassic Alcova Limestone. The core was subsequently donated to the U.S. Geological Survey Core Research Center (CRC) in Lakewood, Colorado, where it was sampled to evaluate the hydrocarbon source rock potential of the Lower and lowermost Upper Cretaceous marine shales.
Basal heat flow from the crystalline basement and lithospheric mantle into the sedimentary column is a required boundary condition in the petroleum systems model. The model uses two basal heat flow conditions that are described using two ASCII grids that show map variations in heat flow (mW/m2). The “BHF000_BasalHeatFlow_Calib.asc” grid describes the modern-day basal heat flow calibrated to, and derived from subsurface temperature data, including 24 high-resolution static temperature logs from the North Dakota Geological Survey and a large proprietary dataset (>1,000) of drill stem test (DST) and bottom hole temperatures (BHT) from boreholes throughout Montana and North Dakota provided by IHS Markit ® (2022). This...
This map shows the subcrop pattern of the Mesozoic rock units present at the top Mesozoic unconformity (also commonly referred to as the base Tertiary unconformity) in Cook Inlet basin, Alaska. The subcrop is projected onto the top Mesozoic unconformity depth surface of Cook Inlet basin, Alaska, published by Shellenbaum and others (2010). Publicly available geologic and geophysical data from multiple sources were collected, interpreted, and integrated into the subcrop map. Formation picks at the top Mesozoic unconformity were determined for 109 wells. Mesozoic horizons from two regional marine two-dimensional (2-D) seismic datasets (approximately 3,300 miles) were interpreted. Eight map units were established for...
In 2013 the U.S. Geological Survey (USGS) drilled a continuous core in the southeastern part of the Wind River Basin, Wyoming to evaluate the source rock potential of the Lower and lowermost Upper Cretaceous marine shales . The well, named the Alcova Reservoir AR–1–13, located on the northeast flank of the Alcova anticline was spud in the lower part of the Frontier Formation and ended in the upper part of the Cloverly Formation recovered core between 40.5 feet (ft) and 623 ft. Thirty-nine samples were selected to evaluate the source rock potential of the marine shales in the cored interval as determined by total organic carbon (TOC) and programmed pyrolysis analysis. Five samples are from the lower part of the...
Categories: Data;
Tags: Alcova Reservoir AR–1–13,
Alcova anticline,
Cloverly Formation,
Frontier Formation,
USGS Science Data Catalog (SDC),
|
|
