Depth grids of the flood-inundation maps for the Patoka River at Jasper, Indiana
Dates
Publication Date
2018-01-18
Start Date
2016-10-01
End Date
2017-05-10
Citation
Fowler, K.K., 2018, Geospatial Datasets and Surface-Water Hydraulic Model for the Patoka River in and near Jasper, Southwest Indiana, Flood-inundation Study: U.S. Geological Survey data release, https://doi.org/10.5066/F7862DX0.
Summary
Digital flood-inundation maps for a 9.5-mile reach of the Patoka River in and near the city of Jasper, southwestern Indiana, from the streamgage near County Road North 175 East, downstream to State Road 162, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage Patoka River at Jasper, Indiana (station number 03375500). The Patoka streamgage is located at the upstream end of the 9.5 mile river reach. [...]
Summary
Digital flood-inundation maps for a 9.5-mile reach of the Patoka River in and near the city of Jasper, southwestern Indiana, from the streamgage near County Road North 175 East, downstream to State Road 162, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage Patoka River at Jasper, Indiana (station number 03375500). The Patoka streamgage is located at the upstream end of the 9.5 mile river reach. Near-real-time stages at this streamgage may be obtained from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service Advanced Hydrologic Prediction Service at http://water.weather.gov/ahps/, although flood forecasts or the stages for action and minor, moderate, and major flood stages are not currently (2017) available at this site (JPRI3). Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relation at the Patoka River at Jasper, Ind., streamgage and the documented high-water marks from the flood of April 30, 2017. The calibrated hydraulic model was then used to compute 5 water-surface profiles for flood stages referenced to the streamgage datum and ranging from 15 feet, or near bankfull, to 19 feet. The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar] data having a 0.98-foot vertical accuracy and 4.9-foot horizontal resolution) to delineate the area flooded at each water level.
Click on title to download individual files attached to this item.
Metadata_for_PatjaspIN_raster.xml Original FGDC Metadata
View
15.81 KB
application/fgdc+xml
PatjaspIN_rasters.zip
41.88 MB
application/zip
Purpose
The datasets were developed in order to produce a series of estimated flood-inundation maps for the Patoka River at Jasper. The datasets (Geographic Information System [GIS] flood polygons and depth grids) can be downloaded. Internet users can select estimated inundation maps that correspond to (1) flood stages at streamgage 03375500 and (2) the NWS site JPRI3. The scope of the study was limited to a 9.5-mile reach of the Patoka River at Jasper, Indiana, from the streamgage near County Road North 175 East, downstream to State Road 162.
