Opatz, C.C., Curran, C.A., Tecca A.E., and Grossman, E.E., 2019, Stage, water velocity and water quality data collected in the Lower Nisqually River, McAllister Creek and tidal channels of the Nisqually River Delta, Thurston County, Washington, February 11, 2016 to September 18, 2017: U.S. Geological Survey data release, https://doi.org/10.5066/F7GF0SG7.
Summary
GPS horizontal and vertical position data were collected on the Nisqually River, McAllister Creek and Nisqually River Delta to survey in water surface, instrumentation and delta structures for to reference North American Vertical Datum 1988 (NAVD88). These data are housed in .csv file named “Nisqually GPS Data” and are sorted by date and time. The position data are grouped by data collection methods Point and Topo. Point method collected position data for 180 seconds and was used to survey surface water and instrumentation elevation. Topo method collected position point data for 1 second and was used for surveying delta bathymetry elevation. Data were collected using the available RTN-GPS network provided by the Washington State Reference [...]
Summary
GPS horizontal and vertical position data were collected on the Nisqually River, McAllister Creek and Nisqually River Delta to survey in water surface, instrumentation and delta structures for to reference North American Vertical Datum 1988 (NAVD88). These data are housed in .csv file named “Nisqually GPS Data” and are sorted by date and time. The position data are grouped by data collection methods Point and Topo. Point method collected position data for 180 seconds and was used to survey surface water and instrumentation elevation. Topo method collected position point data for 1 second and was used for surveying delta bathymetry elevation. Data were collected using the available RTN-GPS network provided by the Washington State Reference Network and using a Trimble R8 GPS antenna mounted on a 2-meter rod. Position data are labeled with descriptors such as “WS” (water surface) or “Delta” which refer to the feature surveyed. Check-in/check-out procedures were satisfied using reference marker Station: pid_sy0708. Two check-in orthometric heights were collected (60.05 and 60.10 m) and following point and topo data collection one check-out orthometric height (60.04 m) was collected. Bathymetric data (Topo method) was collected across the Nisqually River Delta starting at the left bank of McAllister Creek (MC2) and ended on the right bank of tidal channel D4. A total of 2,505 positions were surveyed using the topo method and positions were labeled as “delta-trav###”. Delta elevation ranged from 3.44 to -1.64 meters (NAVD88). Rod and antenna were held at a fixed level marked on both upper rod and technician for maintaining a constant 2 meter height above the walking surface. The bottom half of the rod was removed during topo data collection for ease of walking to avoid rod tip drag and keeping an even pace along the delta structures. Tidal channel bathymetry data consists of transects between banks with position names containing the tidal channel name and distance upstream or downstream of deployed sensor. Only D4 and D3 tidal channel bathymetric data sets were collected. Both D3 (Station ID: “les”) and D4 (Station ID: “are3”) had four tidal channel bathymetry transects collected which consisting of a 10 and 20 meter upstream and downstream of deployed sensor transects. Point data were collected at sites with sensors collecting water depth (WL) time-series data. GPS data was collected by holding the rod/antenna unit at a bubble-level static positioned for 3 minutes (180 epochs) during data collection. Point data were water surface elevations which were used to provide offsets for converting recorded water level (WL) data by sensors to referenced NAVD88.
