Landscape Fire and Resource Management Planning Tools (LANDFIRE), Earth Resources Observation and Science Center (EROS), U.S. Geological Survey (USGS), and Hatten, T.D., 2023, LANDFIRE 2022 (230) Update: U.S. Geological Survey data release, https://doi.org/10.5066/P974JF8W.
Summary
LANDFIRE's (LF) 2022 Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create this product, plot level CH values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance Canopy Cover and CH are used as predictors of disturbed CH using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and time since disturbance. CH [...]
Summary
LANDFIRE's (LF) 2022 Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create this product, plot level CH values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance Canopy Cover and CH are used as predictors of disturbed CH using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and time since disturbance. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php
The LANDFIRE 2022 Update (LF 2022) is designed to produce vegetation, disturbance, and fuels products that inform wildland fire and ecological decision systems. LF 2022 is another update to the LF 2016 Remap base map and LF 2020, it includes adjustments to vegetation and fuels in disturbed areas for disturbances recorded in 2021 and 2022. Disturbances in 2022 represent the first full fiscal year of disturbance. Transition rulesets for vegetation account for disturbances from 2017 to 2022 while fuel updates utilize 2012 to 2022 disturbances. In LF 2022 Existing Vegetation Type (EVT) Ecological Systems classifications are the same as LF 2020, except in areas where agriculture or urban areas have changed. LF 2022 contains the first application of the "zero to one" Time Since Disturbance (TSD) rules for EVC and EVH transition rules. Both LF Existing Vegetation Cover (EVC) and Height (EVH), as well as all fuels products, are 2023 capable in disturbed areas. LF 2022 products are designed to facilitate national and regional level strategic fire and resource management planning and reporting of management activities. The principal purposes of the products include providing, 1) national level, landscape scale geospatial products to support fire and fuels management planning, and 2) consistent fuels products to support fire planning, analysis, and budgeting to evaluate fire management alternatives. Products are created at a 30 meter raster; however, the applicability of products varies by location and specific use. LF products were designed to support 1) national (all states) strategic planning, 2) regional (single large states or groups of smaller states), and 3) strategic/tactical planning for large sub regional landscapes and Fire Management Units (FMUs) (such as significant portions of states or multiple federal administrative entities). The applicability of LF products to support fire and land management planning on smaller areas will vary by product, location, and specific use. Managers and planners must evaluate LF products according to the scale and requirements specific to their needs.