Filters: partyWithName: Virginia L McGuire (X) > partyWithName: Ronald C Seanor (X) > partyWithName: William H Asquith (X)
25 results (9ms)
Filters
Date Range
Types Contacts
Tag Types Tag Schemes |
This dataset is the raster, in feet, of the potentiometric-surface map, spring 2018, Mississippi River Valley alluvial (MRVA) aquifer. The raster cell size is 1,000 meters; the raster altitude data was referenced to the North American Vertical Datum of 1988 (NAVD 88). The raster was interpolated using (1) most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages, and (2) potentiometric-surface contours.
This dataset is a point shapefile of wells measured for the potentiometric surface maps of the Mississippi River Valley alluvial aquifer (MRVA) in Spring 2016, 2018, and 2020. The data provided for each well considered in the applicable potentiometric surface map are the water-level date, altitude [relative to the North American vertical datum of 1988 (NAVD88)], a useYYYY code (which is positive if the water level was used in the potentiometric surface map for that year), a use comment (which is populated for water levels not used), and the water-level change values, for 2016-18, 2018-20, and 2016-20 for water levels with positive useYYYY codes for the applicable years. The data provided for each streamgage considered...
This dataset is a raster surface, in feet, of the depth to water, spring 2020, Mississippi River Valley alluvial aquifer (MRVA). The raster cell size is 1,000 meters (3,280.8 ft). The raster was interpolated using (1) depth-to-water (GW_D2W) data from wells and (2) an assumed value of zero for depth to water at streamgages (SW_D2W) because the precise depth to groundwater at the streamgage is not known..The streamgage data is used only when it appears the regional aquifer and surface water are hydrologically connected.
This dataset is a raster surface, in feet, of the depth to water, spring 2016, Mississippi River Valley alluvial aquifer (MRVA). The raster cell size is 1,000 meters (3,280.8 ft). . The raster was interpolated using (1) depth-to-water (GW_D2W) data from wells and (2) an assumed value of zero for depth to water at streamgages (SW_D2W) because the precise depth to groundwater at the streamgage is not known. The streamgage data is used only when it appears the regional aquifer and surface water are hydrologically connected.
This dataset contains surface-water-altitude (SWA) data from streamgages that was used or considered to create a potentiometric-surface map for the Mississippi River Valley alluvial (MRVA) aquifer for spring 2018. The surface-water-altitude data was referenced to the North American Vertical Datum of 1988 (NAVD 88). The streamgages are measured continuously. The streamgage measurement that was used was from early April 2018 and is an estimate of the groundwater altitudes at the gage location. The resultant potentiometric-surface contours and raster represents the generalized central tendency for spring 2018, but it would not be useful for some purposes, such as for calibration of a groundwater-flow model for early...
This dataset contains the contours, in feet, of the potentiometric-surface, spring 2020, Mississippi River Valley alluvial aquifer (MRVA). The contours are referenced to the North American Vertical Datum of 1988 (NAVD 88). The contours were derived from most of the available groundwater-altitude (GWA) data from wells and surface-water-altitude (SWA) data from streamgages, measured in for spring 2020. The potentiometric contours ranged from 10 to 340 feet (3 to 104 meters) above NAVD 88. The regional direction of groundwater flow was generally towards the south-southwest, except in areas of groundwater-altitude depressions, where groundwater flows into the depressions, and near rivers, where groundwater flow generally...
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
This dataset contains groundwater (GW)-altitude (ALT) data from wells that was used or considered to create a potentiometric-surface map for the Mississippi River Valley alluvial (MRVA) aquifer for spring 2018. The groundwater-altitude data was referenced to the North American Vertical Datum of 1988 (NAVD 88). Most of the wells were measured annually, but some wells were measured more than one time in a year and a small number of wells were measured continuously. Groundwater-altitude data were from wells measured in spring 2018. Spring-time measurements were preferred because water levels had generally recovered from pumping during the previous irrigation season and it was before pumping began for the current irrigation...
Groundwater-level data, in conjunction with attendant metadata and covariates (predictor variables) data, for the Mississippi River Valley alluvial aquifer (MRVA) are used to support statistical and process-based numerical modeling. This page represents a collection of groundwater-level data within the expanse of the Mississippi Alluvial Plain (MAP) (Painter and Westerman, 2018) and are derived from well-specific periods of record of discrete measurements and continuous water levels aggregated to daily statistics. The basic data structures are intended also to serve as interpretability standards for use by statistical software such as described by Asquith and Seanor (2019) and Asquith and others (2019).
A potentiometric-surface map for spring 2020 was created for the Mississippi River Valley alluvial aquifer (MRVA), which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. The location and water-level altitude in feet for these wells and streamgages in spring 2020 are provided in this data release. The interpreted contours and raster of the potentiometric surface are also provided in this data release and in the associated report titled "Potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2020" and available at https://doi.org/10.3133/sim3478/.
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Arkansas,
Illinois,
Kentucky,
LMG,
Louisiana,
This dataset contains the contours, in feet, of the potentiometric-surface, spring 2018, Mississippi River Valley alluvial (MRVA) aquifer. The contours are referenced to the North American Vertical Datum of 1988 (NAVD 88). The contours were derived from most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages, measured in for spring 2018. The potentiometric contours ranged from 10 to 340 feet (3 to 104 meters) above NAVD 88. The regional direction of groundwater flow was generally towards the south-southwest, except in areas of groundwater-altitude depressions, where groundwater flows into the depressions, and near rivers, where groundwater flow generally parallels...
This dataset is the raster, in meters, of the potentiometric-surface map, spring 2018, Mississippi River Valley alluvial (MRVA) aquifer. The raster cell size is 1,000 meters; the raster was referenced to the North American Vertical Datum of 1988 (NAVD 88). The raster, in feet, was interpolated using most of the available groundwater-altitude data from wells, surface-water-altitude data from streamgages, and the potentiometric contours. Then the raster altitude data was converted to meters.
This dataset is the raster, in meters, of the potentiometric-surface map, spring 2020, Mississippi River Valley alluvial aquifer (MRVA). The raster cell size is 1,000 meters; the raster was referenced to the North American Vertical Datum of 1988 (NAVD 88). The raster, in feet, was interpolated using most of the available groundwater-altitude (GWA) data from wells, surface-water-altitude (SWA) data from streamgages, and the potentiometric contours. Then the raster altitude data was converted to meters.
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Arkansas,
Illinois,
Kentucky,
LMG,
Louisiana,
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Arkansas,
Illinois,
Kentucky,
LMG,
Louisiana,
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Arkansas,
Illinois,
Kentucky,
LMG,
Louisiana,
This dataset contains surface-water-altitude (SWA) data from streamgages that were used or considered (indicated by the field USE_2020) to create a potentiometric-surface map for the Mississippi River Valley alluvial aquifer (MRVA) for spring 2020. The SWA data was referenced to the North American Vertical Datum of 1988 (NAVD 88). The streamgages are measured continuously. The streamgage measurement that was used was from early April 2020 and is an estimate of the groundwater altitudes (GWAs) at the gage location. The resultant potentiometric-surface contours and raster represents the generalized central tendency for spring 2020, but it would not be useful for some purposes, such as for calibration of a groundwater-flow...
A potentiometric-surface map for spring 2018 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric-surface map for 2018 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
This data release consists of 4 data sets--rasters of generalized depth to water in the Mississippi River Valley alluvial aquifer (MRVA) in spring 2016, 2018, and 2020 and a point file of the wells with water-level measurements used to create the depth to water rasters and, for each well with applicable data, the values of water-level change from spring 2016 to spring 2018, spring 2018 to spring 2020, and spring 2016 to spring 2020. The MRVA underlies parts of seven states, including Arkansas, Illinois, Kentucky, Louisiana, Missouri, Mississippi, and Tennessee These data sets were created to characterize the depth to water in the MRVA and the value of water-level change at each well with the applicable data. These...
|
|