Folders: ROOT > ScienceBase Catalog > Energy Resources Program > Central Energy Resources Science Center - Legacy Data Collection ( Show all descendants )
501 results (157ms)
Location
Folder
ROOT _ScienceBase Catalog __Energy Resources Program ___Central Energy Resources Science Center - Legacy Data Collection Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes |
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506501 = Chattanooga Shale/Floyd Shale-Paleozoic,
50650101 = Pre-Mississippian Carbonates Gas,
50650102 = Carboniferous Sandstones Oil and Gas,
506502 = Pottsville Coal,
50650281 = Black Warrior Basin Coalbed Gas,
Drilling-density cell maps show the number of wells that have been drilled into the storage assessment unit (SAU). Each 1-square-mile cell has a count for the number of unique well boreholes drilled into the SAU. For a given sedimentary basin, the USGS National Geologic CO2 Sequestration Assessment Project identifies SAUs containing the potential for storage and sequestration of carbon dioxide. Proprietary well header data from IHS ENERDEQ through 2010 were queried to determine which wells were drilled into specific SAUs. The coordinates of wells are proprietary and cannot be released; however, counts of the number of wells per square mile are presented in the well drilling density data layer.
This is a polygon coverage of the structure contours of the Calico sequence boundary in the Kaiparowits Plateau, southern Utah. Sequence boundary elevations are based on 166 drill sites. The Calico sequence boundary occurs from 50-100 ft below the base of the John Henry Member, therefore an inferred elevation of the sequence boundary was used at numerous locations along the outcrop where the John Henry Member was mapped. The outside polygon defines the base of the coal-bearing Calico and A-sequences of the Straight Cliffs Formation east of 112 degrees of longitude. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
These are shapefiles and ARC/INFO polygon coverages showing the isopachs of total net coal in beds greater than or equal to 1.2' thick for the A through G coal zones, Danforth Hills coal field. The coverage danathkg is the isopach coverage for the A coal zone; danbthkg is for the B coal zone, and so on.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Colorado Plateau coal assessment study area,
Danforth Hills,
Net coal thickness isopachs, Ferris 23, 25, 31, 50 and 65 coal zones, Hanna Basin Wyoming (fer*catg)
These ArcView shapefiles contain representations of the net coal thickness in the Ferris 23, 25, 31, 50 and 65 coal zones in the Ferris coalfield, Hanna Basin, Wyoming. These datasets were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Carbon County,
Coal,
Coal thickness,
Ferris 23 coal zone,
Ferris 23 study limit,
These ArcView shapefiles contain representations of the Hanna coal zone study limit boundaries in the Hanna coalfield, Hanna Basin, Wyoming. These shapefiles were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Boundary,
Carbon County,
Coal,
Hanna 77 coal zone,
Hanna 77 study limit,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
National Assessment of Oil and Gas Project - Wind River Basin Province (035) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
These are shapefiles and coverages of final unioned polygon coverages used to calculate coal resources of the Cameo/Fairfield coal group east of 107 deg 15' longitude, and the Cameo/Wheeler, South Canyon, and Coal Ridge coal zones west of 107 deg 15' longitude in the southern Piceance Basin, northwestern Colorado. Pscbfing was used for the area east of 107 deg 15' longitude; pscwfing was used for the Cameo/Wheeler coal zone; psscfing was used for the South Canyon coal zone; pscrfing was used for the Coal Ridge coal zone. Polygons that make up the final unioned polygons include counties, 7.5' quadrangles, townships, surface and coal ownership, reliability, and, overburden. The final unioned coverage for each coal...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Crested Butte,
National Coal Resource Assessment (NCRA),
National Assessment of Oil and Gas Project - Sacramento Basin Province (009) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500901 = Dobbins-Forbes,
50090101 = Forbes, Kione and Older,
50090102 = Lower Princeton Canyon Fill and Northern Nonmarine,
500902 = Winters-Domengine,
50090201 = Late Cretaceous Deltaic and Submarine Fan,
An ESRI GRID raster data model of the overburden material above the Mahogany Zone was needed to perform calculations in the Piceance Basin, Colorado as part of a 2009 National Oil Shale Assessment.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CO,
Colorado,
Earth science,
Economic geology,
Energy resources,
The digitally compiled map includes geology, oil and gas field centerpoints, and geologic provinces of the Arctic (North Pole area encircled by 640 N Latitude). The GIS data sets were designed originally in ESRI's ARC/INFO ver. 8.0.1 and were published as part of a series of interim CD-ROM products of the U.S. Geological Survey's World Energy Project (WEP). The goal of the WEP is to assess the undiscovered, technically recoverable oil and gas resources of the world. Results of this assessment were reported in the year 2000 (see USGS DDS-60; http://pubs.usgs.gov/dds/dds-060/).
Petroleum production data are usually stored in a format that makes it easy to determine the year and month production started, if there are any breaks, and when production ends. However, in some cases, you may want to compare production runs where the start of production for all wells starts at month one regardless of the year the wells started producing. This report describes the JAVA program the U.S. Geological Survey developed to examine water-to-oil and water-to-gas ratios in the form of month one, month two, and so on with the objective of estimating quantities of water and proppant used in low-permeability petroleum production. The text covers the data used by the program, the challenges with production data,...
Categories: Data,
pre-SM502.8;
Tags: USGS Science Data Catalog (SDC),
Water Assessment,
data cleaning,
source code,
water-to-gas ratio,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
This dataset comprises a collection of tabular data and graphical images supporting the U.S. Geological Survey's National Oil and Gas Assessment (NOGA) for Denver Basin Province (039). The dataset includes detailed information on crude oil and natural gas production, including volumetric and descriptive data such as cumulative production, remaining reserves, and known recoverable volumes. Historical data covering field-discovery dates, well completion dates, exploration objectives, and well depths are also provided. Data sources include commercial databases along with supplemental information from various federal and state agencies. No proprietary data is included in this. The dataset is presented in multiple formats,...
Categories: Data,
pre-SM502.8;
Tags: Energy Resources,
National and Global Assessment Oil and Gas,
Natural Gas,
Oil,
USGS Science Data Catalog (SDC),
This dataset comprises a collection of tabular data and graphical images supporting the U.S. Geological Survey's National Oil and Gas Assessment (NOGA) for Powder River Basin Province (033). The dataset includes detailed information on crude oil and natural gas production, including volumetric and descriptive data such as cumulative production, remaining reserves, and known recoverable volumes. Historical data covering field-discovery dates, well completion dates, exploration objectives, and well depths are also provided. Data sources include commercial databases along with supplemental information from various federal and state agencies. No proprietary data is included in this. The dataset is presented in multiple...
Categories: Data,
pre-SM502.8;
Tags: Energy Resources,
National and Global Assessment Oil and Gas,
Natural Gas,
Oil,
USGS Science Data Catalog (SDC),
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
This coverage includes arcs and arc labels that hold the Bouguer Gravity anomaly value for contours and type contours of the original map of Bangladesh with the same name.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Anomaly,
Bangladesh,
Digital map,
Earth Science,
Ganges-Brahmaputra Delta, Province 8047,
The U.S. Geological Survey (USGS) recently completed a comprehensive assessment of in-place oil in oil shales in the Eocene Green River in the Greater Green River Basin, Wyoming, Colorado, and Utah. A database was compiled that includes about 47,000 Fischer assays from 186 core holes and 240 rotary drill holes. Most of the oil yield data were analyzed by the former U.S. Bureau of Mines oil shale laboratory in Laramie, Wyoming, and some analyses were made by private laboratories. Total in-place resources for the three assessed units in the Green River Formation are: (1) Tipton Shale Member, 362,816 million barrels of oil (MMBO), (2) Wilkins Peak Member, 704,991 MMBO, and (3) LaClede Bed of the Laney Member, 377,184...
Categories: Data,
pre-SM502.8;
Tags: State of Wyoming,
USGS Science Data Catalog (SDC),
geoscientificInformation,
oil shale resources
|
|
