Skip to main content

Organization

thumbnail
Digital flood-inundation maps for an approximate 2.5-mile (mi) reach of the Clear Fork Mohican River that extends approximately from State Route 97 to the downstream corporate boundary for Bellville, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Muskingum Watershed Conservancy District. The flood-inundation maps show estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Clear Fork Mohican River at Bellville (station number 03131982). The maps can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/. Near-real-time stages at this streamgage...
thumbnail
The depth grids show the depth of flooding on the Clear Fork Mohican River near Bellville, Ohio on local map backgrounds, based on stages of 9.0 ft to 17.0 ft at the USGS streamgage, Clear Fork Mohican River at Bellville, Ohio, 03131982.
thumbnail
Velocity surveys and three-dimensional point measurements of basic water-quality constituents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, June 10–12, 2019, and August 19–21, 2019
Water velocities and water-quality constituents were measured along planned survey lines, which were generally perpendicular to the shoreline and spaced 100 meters apart, over an approximately 2.3-mile section of nearshore Lake Erie on June 10-12, 2019 (survey 1), and August 19-21, 2019 (survey 2), using a 1200 kHz acoustic Doppler current profiler (ADCP), a YSI 6920 V2 multiparameter sonde, and a YSI EcoMapper autonomous underwater vehicle (AUV). Water-quality data collected in this area included near-surface and three-dimensional measurements of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin (blue-green algae). The data were geo-referenced with an integrated...
thumbnail
Laboratory Assessment of Colloidal Borescope and Heat-Pulse Flowmeters in Measuring Horizontal Flow in Fractured-Rock Simulators
The U.S. Geological Survey (USGS), at the request of the U.S. Army Environmental Command (USAEC), evaluated the capabilities of two borehole technologies to measure horizontal groundwater velocity and direction of flow in a parallel-plate fractured-rock simulator. A colloidal borescope flowmeter (HB) and a heat-pulse flowmeter (HH) were deployed in 4-inch and 6-inch inner-diameter simulated uncased wells that spanned 0.39- and 1.0-inch apertures with simulated groundwater velocities ranging from 2 to 958 feet per day. Measurements were made at the USGS Hydrologic Instrumentation Facility in the Hydraulics Laboratory and the Indianapolis office of the USGS Ohio-Kentucky-Indiana Water Science Center. Ten measurements...
thumbnail
Climatic data are from Daymet (Thornton and others, 2016) and include maximum daily air temperature and total daily precipitation on a 1-km resolution; these data replace and update the original climate data used for the tool (Williamson and others, 2009).
View more...
ScienceBase brings together the best information it can find about USGS researchers and offices to show connections to publications, projects, and data. We are still working to improve this process and information is by no means complete. If you don't see everything you know is associated with you, a colleague, or your office, please be patient while we work to connect the dots. Feel free to contact sciencebase@usgs.gov.